Anmol India Chemicals India

ISO-9001 JK Kosher GMP HACCP FSSAI FSSC 22000 FSSAI ISO14001 OHSAS 18001 Allergen free Gluten free
(FDA) GMP Approved, ISO-9001:2008, ISO-14001, ISO OHSAS-18001, HACCP, FSSC 220000, FSSAI, "REACH" Pre-registered Kosher & Halal Certified

Home ------ Contact

Urea USP BP IP ACS Analytical Reagent FCC Food Grade Manufacturers

Anmol Chemicals Group, established in 1976, is the pioneer manufacturer of Specialty chemicals, Pharmaceutical Excipients, Fragrance & Flavor chemicals in India. Anmol Chemicals Group has manufacturing facilities spread across Western India, representatives in Houston Chicago USA and toll manufacturers in China. We also have toll manufacturing units for processing chemicals in a few countries around the world. We make IP, BP, USP, Ph. Eur., FCC or Food Grade, ACS, AR or Analytical Reagent Grade, LR or Laboratory Reagent Grade, Pure and Technical Grades of various chemicals. All our items are analyzed to meet the required standards.

Our manufacturing facility is FDA approved and GMP, ISO-9001-2008, ISO-14001, ISO OHSAS 18000, ISO 22000-2005 HACCP, FSSAI, FSSC-22000, certified. We are offering products manufactured as per Kosher and Halal approved certified method. We are pre-registered with "Reach" for export to European countries. We can give all solid chemical materials as per specified size or shape.

Exporter Importer by Sea Exports by Air Chemical Exporter. Palletized for Export. Liquid Products HDPE Drum Packing of Chemicals Bulk Export Packing Jumbo Bag Packing

Urea MSDS or SDS of BP IP USP ACS AR Analytical Reagent FCC Food Grade Manufacturers

Urea

Synonyms: Carbamide, Carbamide resin, Isourea, Carbonyl diamide, Carbonyldiamine
CAS Number: 57-13-6, Molecular Weight: 60.1, Chemical Formula: NH2CONH2, EINECS EC Number: 200-315-5

Urea BP
CH4N2O -- 60.1 -- 57-13-6

DEFINITION
Carbamide
Content: 98.5 per cent to 101.5 per cent (dried substance).

CHARACTERS
Appearance: White or almost white, crystalline powder or transparent crystals, slightly hygroscopic.
Solubility: Very soluble in water, soluble in alcohol, practically insoluble in methylene chloride.

IDENTIFICATION
First identification A, B.
Second identification A, C, D.
A. Melting point: 132C to 135C.
B. Infrared absorption spectrophotometry.
C. Dissolve 0.1 g in 1 ml of water. Add 1 ml of nitric acid. A white, crystalline precipitate is formed.
D. Heat 0.5 g in a test tube until it liquefies and the liquid becomes turbid. Cool, dissolve in a mixture of 1 ml of dilute sodium hydroxide solution and 10 ml of water and add 0.05 ml of copper sulphate solution. A reddish-violet colour is produced.

TESTS
Solution S: Dissolve 10.0 g in water and dilute to 50 ml with the same solvent.
Appearance of solution: The solution is clear and colourless.
To 2.5 ml of solution S add 7.5 ml of water.
Alkalinity: To 2.5 ml of solution S add 7.5 ml of water, 0.1 ml of methyl red solution and 0.4 ml of 0.01 M hydrochloric acid . The solution is red to orange.
Biuret: Maximum 0.1 per cent.
Ammonium: Maximum 500 ppm, determined on 0.1 ml of solution S.
Heavy metals: Maximum 10 ppm.
Loss on drying: Maximum 1.0 per cent, determined on 1.000 g by drying in an oven at 105C for 1h.
Sulphated ash: Maximum 0.1 per cent, determined on 1.0 g.


Urea USP
CH4N2O 60.06
Carbamide.

Urea contains not less than 99.0 percent and not more than 100.5 percent of CH4N2O.

Labeling— Where it is intended for use in preparing injectable dosage forms, the label states that it is sterile or must be subjected to further processing during the preparation of injectable dosage forms.
Identification
A: Heat about 500 mg in a test tube: it liquefies, and ammonia is evolved. Continue the heating until the liquid becomes turbid, then cool. Dissolve the fused mass in a mixture of 10 mL of water and 1 mL of sodium hydroxide solution (1 in 10), and add 1 drop of cupric sulfate TS: the solution acquires a reddish-violet color.
B: Dissolve 100 mg in 1 mL of water, and add 1 mL of nitric acid: a white crystalline precipitate of urea nitrate is formed.
Melting range: between 132 and 135.
Residue on ignition: not more than 0.1%.
Alcohol-insoluble matter—0.04%.
Chloride— 0.007%.
Sulfate— 0.010%.
Heavy metals— the limit is 0.002%.
Other requirements— Where the label states that Urea is sterile, it meets the requirements for Sterility Tests 71 and for Bacterial endotoxins under
Urea for Injection:. Where the label states that Urea must be subjected to further processing during the preparation of injectable dosage forms, it meets the requirements for Bacterial endotoxins under Urea for Injection.


Urea FCC
Carbamide
CH4N2O Formula wt 60.06
CAS: [57-13-6]

DESCRIPTION
Urea occurs as a colorless to white, prismatic, crystalline powder or as small, white pellets. It is commonly produced from CO2 by ammonolysis or from cyanamide by hydrolysis. It is freely soluble in water and in boiling alcohol, but practically insoluble in chloroform and in ether. It melts at a range of 132° to 135°.
Function Fermentation aid.

REQUIREMENTS
Identification:
A. Heat about 500 mg of sample in a test tube until it liquefies. Ammonia vapor is produced. Continue heating until the liquid becomes turbid, and then cool. Dissolve the fused mass in a 1:10 sodium hydroxide solution:water mixture. Add 1 drop of cupric sulfate TS. A red-violet colored solution develops.
B. Dissolve 100 mg of sample in 1 mL of water, and add 1 mL of nitric acid. A white precipitate of urea nitrate forms.
Assay: Not less than 99.0% and not more than 100.5% of CH4N2O.
Alcohol-Insoluble Matter: Not more than 0.04%.
Chloride: Not more than 0.007%.
Lead: Not more than 5 mg/kg.
Loss on Drying: Not more than 1.0%.
Residue on Ignition: Not more than 0.1%.
Sulfate: Not more than 0.01%.


Urea ACS
NH2CONH2
Formula Wt 60.06
CAS Number 57-13-6

REQUIREMENTS

Assay 99.0-100.5%
Melting point 132-135C

MAXIMUM ALLOWABLE

Insoluble matter 0.01%
Residue after ignition 0.01%
Chloride (Cl) 5 ppm
Sulfate (SO4) 0.001%
Heavy metals (as Pb) 0.001%
Iron (Fe) 0.001%

Logo

Manufacturers

ANMOL CHEMICALS
Taloja Mumbai and Ankleshwar Gujarat, INDIA
Representatives in Houston, Chicago and New York, USA
TEL: (OFF) 91-22-23726950, 23774610, 23723564

e-mail: info@anmol.org

Copyright and Usual Disclaimer is Applicable
Last updated 8-aug-17

Calcium Chloride in Jumbo Bags Drum Packing Paletized and Shrink Wrapped Packing for Exports to USA UAE Africa Tanzania Turkey Kenya Dubai

Exporters to USA, Canada, UAE, Europe, South Africa, Tanzania, Kenya, Egypt, Turkey, Nigeria, Uganda, Brazil, Chile, Argentina, Dubai, Cameroon, Mexico, Brazil, Chile, Argentina, Korea, Thailand, Malaysia, Indonesia, Australia, China, Germany, France, etc.

Representatives in New York, Houston - Texas, Chicago - Illinois, Los Angeles.

Fast Selling IP BP USP ACS FCC Food Grades of Chemicals by Anmol Chemicals
Aluminum Chloride --- Ammonium Chloride --- Ammonium Molybdate --- Benzyl Alcohol --- Bismuth Citrate --- Boric Acid --- Borax; Sodium Borate --- Calcium Butyrate --- Calcium Carbonate --- Calcium Chloride --- Calcium Hydroxide --- Calcium Saccharate --- Carbamide Peroxide --- Carmellose Calcium --- Carmellose Sodium --- Calcium Oxide --- Calcium Sulfate --- Chromic Chloride --- Copper Sulfate --- Cupric Chloride --- Ferric Chloride --- Fumaric Acid ---Magnesium Butyrate --- Magnesium Chloride --- Magnesium Sulfate --- Magnesium Oxide --- Malic Acid --- Maleic Acid --- Manganese Chloride --- Manganese Sulfate --- Propylene Carbonate --- Potassium Bromide --- Potassium Chloride --- Potassium Hydroxide Pellets --- Potassium Alum --- Sodium Acetate --- Sodium Butyrate --- Sodium Molybdate --- Sodium Perborate --- Sodium Hydroxide --- Sodium Sulphate --- Sodium Thiosulfate --- Urea --- Zinc Chloride --- Zinc Sulphate ---
Other Best Selling Products
Ammonium Persulfate --- Ceric Ammonium Nitrate --- Encapsulated Fumaric Acid --- Picric Acid --- Sodium Diacetate

Urea
IP BP Ph Eur USP ACS AR Analytical Reagent LR FCC Food Grades
Urea