|
|
|
|
|
 |
|
||
|
(FDA) GMP Approved
ISO-9001:2008 Certified ISO-22000:2005 HACCP |
|||
-------
-------
Anmol Chemicals Group, established in 1976, is the pioneer manufacturer of Potassium Chloride, Pharmaceutical, Fragrance & Flavor chemicals in India. Anmol Chemicals Group has manufacturing facilities spread across Western India, representatives in Houston Chicago USA and toll manufacturers in China. We also have toll manufacturing units for processing chemicals in a few countries around the world. We make IP, BP, USP, Ph. Eur., FCC or Food Grade, ACS, AR or Analytical Reagent Grade, LR or Laboratory Reagent Grade, Pure and Technical Grades of various chemicals. All our items are analyzed to meet the required standards.
Our manufacturing facility is FDA approved and ISO-9001-2008, ISO 22000-2005 HACCP certified. We are offering products manufactured as per Kosher and Halal approved method. We are pre-registered with "Reach" for export to European countries.
Potassium Chloride BP USP IP Food Grade Manufacturers
Synonyms: Potassium
Monochloride, Cloruro de Potasio, Cloruro Potasio
The corresponding Mineral is Muriate of Potash or MOP
CAS No.: 7447-40-7; Molecular Weight: 74.5; Chemical Formula: KCl
Potassium Chloride BP USP ACS AR Food Grade
Potassium Chloride
IP. Technical & Pure
MSDS of Potassium Chloride Manufacturers
Potassium Chloride USP Specifications
Potassium Chloride
USP
KCl 74.55
Assay— Potassium
Chloride contains not less than 99.0 percent and not more than 100.5 percent
of KCl, calculated on the dried basis.
Packaging and storage— Preserve in well-closed containers.
Labeling— Where
intended for use in hem dialysis, it is so labeled.
Identification— A
solution (1 in 20) responds to the tests for Potassium and for Chloride.
Acidity or alkalinity— To a solution of 5.0 g in 50 mL of carbon dioxide–free water add 3 drops
of phenolphthalein TS: no pink color is produced. Then add 0.30 mL of 0.020
N sodium hydroxide: a pink color is produced.
Loss on drying — Dry it at 105 for 2 hours: it loses not more than 1.0% of its
weight.
Iodide or bromide—
IODIDE—
Standard stock
solution— Transfer an accurately weighed quantity, about 41 mg, of
potassium iodide to a 25-mL volumetric flask. Dissolve in and dilute with
water to volume, and mix.
Standard solution— Dilute 1.0 mL of Standard stock solution
with water to 25 mL, and
mix. Dilute 2.0 mL of this solution with water to 8 mL, and proceed as
directed for Test solution beginning with “Add 1 mL each of
chloroform”.
Test solution— Dissolve 2 g in 8 mL of water. Add 1 mL each of
chloroform and diluted hydrochloric acid, then add 2 drops of a chloramine T
solution (0.1 in 100), and shake gently. The violet color of the chloroform
layer is not darker than that of a concomitantly prepared Standard
solution: the limit is 0.005%.
BROMIDE—
Standard solution— Transfer an accurately weighed quantity, about 32 mg, of sodium bromide to a
25-mL volumetric flask. Dissolve in and dilute with water to volume, and
mix. Dilute 2.0 mL of this solution with water to 8 mL, and proceed as
directed for Test solution beginning with “Add 1 mL each of
chloroform”.
Test solution— Dissolve 2 g in 8 mL of water. Add 1 mL each of
chloroform and diluted hydrochloric acid, then add 5 drops of a chloramine T
solution (1 in 100), and shake gently. The brown color of the chloroform
layer is not darker than that of a concomitantly prepared Standard
solution: the limit is 0.1%.
Aluminum— where it
is labeled as intended for use in hem dialysis— Proceed as directed using
2.0 g of Potassium Chloride to prepare the Test Preparation: the
limit is 1 µg per g.
Calcium and magnesium—
To 20 mL of a solution (1 in 100) add 2 mL each of 6 N ammonium
hydroxide, ammonium oxalate TS, and dibasic sodium phosphate TS: no
turbidity is produced within 5 minutes.
Sodium— A solution
(1 in 20), tested on a platinum wire, does not impart a pronounced yellow color to a non-luminous
flame.
Heavy metals— Dissolve 2.0 g in 25 mL of water: the limit is 0.001%.
Organic volatile
impurities: meets the requirements.
Potassium Chloride BP Specifications
Potassium Chloride
BP
KCl 74.55
Content
99.0 per cent to 100.5 per cent of KCl (dried substance).
CHARACTERS
Appearance
White or almost white, crystalline powder or colourless crystals.
Solubility
Freely soluble in water, practically insoluble in anhydrous ethanol.
IDENTIFICATION
It gives the reactions of chlorides.
Solution S gives the reactions of
potassium.
Solution S
Dissolve 10.0 g in carbon dioxide-free water R prepared from distilled water R and dilute to 100 ml with the same solvent.
Appearance of solution: Solution S is clear and colourless.
Acidity or alkalinity: To 50 ml of solution S add 0.1 ml of bromothymol blue solution. Not more than 0.5 ml of 0.01 M hydrochloric acid or 0.01 M sodium hydroxide is required to change the colour of the indicator.
Bromides: Maximum 0.1 per cent.
Iodides: Moisten 5 g by the drop wise addition of a freshly prepared mixture of 0.15 ml of sodium nitrite solution, 2 ml of 0.5 M sulphuric acid , 25 ml of iodide-free starch solution and 25 ml of water. After 5 min, examine in daylight. The substance shows no blue colour.
Sulphates: Maximum 300 ppm.
Aluminium: Maximum 1.0 ppm, if intended for use in the manufacture of hem dialysis solutions.
Barium: To 5 ml of solution S add 5 ml of distilled water and 1 ml of dilute sulphuric acid. After 15 min, any opalescence in the solution is not more intense than that in a mixture of 5 ml of solution S and 6 ml of distilled water.
Iron: Maximum 20 ppm.
Magnesium and alkaline-earth metals: Maximum 200 ppm, calculated as Ca.
Sodium: Maximum 0.10 per cent, if intended for use in the manufacture of parenteral preparations or hem dialysis solutions.
Heavy metals: Maximum 10 ppm.
Loss on drying: Maximum 1.0 per cent, determined on 1.000 g by drying in an oven at 105 C for 3h.
Potassium Chloride FCC US Food Chemical Codex
Potassium Chloride
KCl 74.55
Formula wt 74.55
Function: Nutrient; gelling agent; salt substitute; yeast food.
REQUIREMENTS:
Identification:
A 1:20 aqueous solution gives positive tests for Potassium and for Chloride.
Assay: Not less than
99.0% of KCl after drying; and not less than 98.0% of KCl after drying when
a sample contains added substance.
Acidity or Alkalinity: A sample containing no added substance passes test.
Heavy Metals (as
Pb): Not more than 5 mg/kg.
Iodide and/or Bromide: Passes test.
Loss on Drying: Not
more than 1.0%.
Sodium: Passes test.
Potassium Chloride ACS Specifications
American Chemical Society Reagent GradePotassium Chloride KCl
Formula Wt 74.55
CAS Number 7447-40-7
REQUIREMENTS
Assay:
---------------------- 99.0-100.5% KCl
pH of a 5% solution ---------
5.4-8.6 at 25C
MAXIMUM ALLOWABLE
Insoluble matter ------------
0.005%
Iodide (I) ------------------
0.002%
Bromide (Br) ----------------
0.01%
Chlorate and nitrate (as NO3)
0.003%
Nitrogen compounds (as N) --- 0.001%
Phosphate (PO4)
-------------
5 ppm
Sulfate (SO4) ---------------
0.001%
Barium (Ba) -----------------
Passes test
Heavy metals (as Pb) -------- 5 ppm
Iron (Fe) -------------------
3 ppm
Calcium (Ca) ----------------
0.002%
Magnesium (Mg) -------------- 0.001%
Sodium (Na)
-----------------
0.005%
Potassium Chloride BP
Potassium Chloride USP
Potassium Chloride Manufacturers
ANMOL CHEMICALS
S-8, SARIFA MANSION, 2ND FLANK ROAD,
CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23770100, 23726950,
23774610, 23723564. FAX: 91-22-23728264
e-mail: anmolc@mtnl.net.in
Cell Call to Anmol: +91-9821870100
Copyright and Usual
Disclaimer is
Applicable
Last updated
28 April, 2012
--------------
The trouble with the Rat Race is
Even if you Win you are still a Rat
Old Spice: Manufacturing since
more than Three Decades:
Ammonium
Chloride
--------
Calcium
Chloride
--------
Magnesium Chloride
Potassium Chloride -------
Sodium
Acetate
----------
Sodium Diacetate
Sodium Thiosulphate ------
Zinc
Chloride
----------- Magnesium
Sulphate
Best Selling IP BP USP FCC ACS
Grades of Chemicals by Anmol Chemicals
Ammonium
Chloride
--------
Benzyl Alcohol
----------
Boric Acid
Borax; Sodium
Borate
-----
Calcium
Chloride
--------
Calcium
Hydroxide
Calcium Saccharate
------- Citric Acid -------------
Calcium Phosphate
Calcium Oxide
------------
Calcium Sulfate
---------
Chromic
Chloride
Gentian Violet
-----------
Magnesium
Chloride ------
Magnesium Sulfate
Maleic Acid --------------
Manganese Chloride
------
Manganese
Sulfate
Methylene Blue
----------- Potassium Chloride
------ Potassium
Phosphate
Sodium Phosphate
--------- Sodium Propionate
-------
Sodium Acetate
Sodium
Bicarbonate -------
Sodium Hydroxide
--------
Sodium Thiosulfate
Zinc Chloride
Other Best Seller Products
Ammonium Bromide ---------
Ammonium Sulfate --------
Ammonium Phosphate
Ammonium Persulfate
------ Aluminum Chloride
------- Barium Chloride
Calcium Nitrate Nitrite
-- Calcium Propionate
------ Copper Sulfate
Ceric Ammonium Nitrate
--- Cupric Chloride ---------
Potassium Bromide
Potassium Iodide ---------
Potassium Nitrate Nitrite
Sodium Nitrite & Nitrate
Sodium Bromide -----------
Isatoic Anhydride -------
Sodium Formaldehyde Bisulfite
Exporters to USA, UAE, Europe, South Africa, Tanzania, Kenya, Egypt, Turkey, Nigeria, Uganda, Brazil, Chile, Argentina, Dubai etc.
Representatives in New York, Houston - Texas, Chicago - Illinois, Los Angeles.
--------------