Group Since 1976
(FDA) GMP Approved ISO-9001:2008 Certified ISO-22000:2005 HACCP "REACH" Pre-registered Kosher Certified Halal Certified

--------------

Anmol Chemicals Group, established in 1976, is the pioneer manufacturer of Sodium Bicarbonate, Pharmaceutical, Fragrance & Flavor chemicals in India.  Anmol Chemicals Group has manufacturing facilities spread across Western India, representatives in Houston Chicago USA and toll manufacturers in China. We also have toll manufacturing units for processing chemicals in a few countries around the world. We make IP, BP, USP, Ph. Eur., FCC or Food Grade, ACS, AR or Analytical Reagent Grade, LR or Laboratory Reagent Grade, Pure and Technical Grades of various chemicals. All our items are analyzed to meet the required standards.

Our manufacturing facility is FDA approved and ISO-9001-2008, ISO 22000-2005 HACCP certified. We are offering products manufactured as per Kosher and Halal approved method. We are pre-registered with "Reach" for export to European countries.

 

   MSDS of Sodium Bicarbonate Manufacturers
Sodium Bicarbonate BP USP IP ACSFood

Sodium Bicarbonate Manufacturers USP BP IP ACS

Sodium Bicarbonate BP

Sodium Hydrogen Carbonate
Sodium Bicarbonate BP
NaHCO3
84.0ıı144-55-8

Action and use
Antacid; used in treatment of electrolyte deficiency.

DEFINITION
Content
99.0 per cent to 101.0 per cent.NaHCO3

CHARACTERS
Appearance
White or almost white, crystalline powder.
Solubility
Soluble in water, practically insoluble in ethanol (96 per cent). When heated in the dry state or in solution, it gradually changes into sodium carbonate.

IDENTIFICATION
A. To 5 ml of solution S add 0.1 ml of phenolphthalein solution. A pale pink colour is produced. Heat; gas is evolved and the solution becomes red.
B. It gives the reaction of carbonates and bicarbonates.
C. Solution S gives reaction of sodium.

TESTS
Solution S
Dissolve 5.0 g in 90 ml of carbon dioxide-free water and dilute to 100.0 ml with the same solvent.
Appearance of solution
Solution S is clear and colourless.
Carbonates
The pH of freshly prepared solution S is not greater than 8.6
Chlorides
Maximum 150 ppm
Sulphate
Maximum 150 ppm
Ammonium
Maximum 20 ppm.
Arsenic
Maximum 2 ppm, determined on 0.5 g.
Calcium
Maximum 100 ppm.
To a suspension of 1.0 g in 10 ml of distilled water add hydrochloric acid until neutral and dilute to 15 ml with distilled water.
Iron
Maximum 20 ppm.
Heavy metals
Maximum 10 ppm.

---

Sodium Bicarbonate USP NaHCO3

NaHCO3
Sodium Bicarbonate USP
84.01
Carbonic acid monosodium salt
Monosodium carbonate

Sodium Bicarbonate contains not less than 99.0 percent and not more than 100.5 percent of NaHCO3, calculated on the dried basis.

Labeling— Where Sodium Bicarbonate is intended for use in hem dialysis, it is so labeled.
Identification— A solution of it meets the requirements of the tests for Sodium 191 and for Bicarbonate.
Loss on drying— Dry about 4 g, accurately weighed, over silica gel for 4 hours: it loses not more than 0.25% of its weight.
Insoluble substances— Dissolve 1 g in 20 mL of water: the resulting solution is complete and clear.
Carbonate (where it is labeled as intended for use in hem dialysis)— The limit of carbonate is not more than 0.23%. to be determined as per tests defined.
Normal carbonate— Add 2.0 mL of 0.10 N hydrochloric acid and 2 drops of phenolphthalein TS to 1.0 g of Sodium Bicarbonate, previously dissolved without agitation in 20 mL of water at a temperature not exceeding 15 : the solution does not assume more than a faint pink color immediately.
Chloride—: a 0.35-g portion shows no more chloride than corresponds to 1.48 mL of 0.0010 N hydrochloric acid (0.015%).
Limit of sulfur compounds— To pass the test
Aluminum (where it is labeled as intended for use in hem dialysis)— The limit is 2 µg per g.
Arsenic— The limit is 2 µg per g.
Calcium and magnesium (where it is labeled as intended for use in hem dialysis)
— the percentage of Ca in the specimen limit is 0.01%.
— the percentage of Mg in the specimen the limit is 0.004%.
Copper (where it is labeled as intended for use in hem dialysis)— Cu in the specimen the limit is 1 µg per g.
Iron (where it is labeled as intended for use in hem dialysis)— not more than 5µg per g.
Heavy metals—the limit is 5 µg per g.
Limit of ammonia— to pass the test
Limit of organics (where it is labeled as intended for use in hem dialysis)— To pass the test

---

Sodium Bicarbonate FCC

Sodium Hydrogen Carbonate; Baking Soda.
Sodium Bicarbonate FCC
NaHCO3 Formula wt 84.01
INS: 500(ii) CAS: [144-55-8]

DESCRIPTION
Sodium Bicarbonate occurs as a white, crystalline powder. It is stable in dry air, but it slowly decomposes in moist air. One gram dissolves in 10 mL of water. It is insoluble in alcohol. Its solutions, when freshly prepared with cold water without shaking, are alkaline to litmus. The alkalinity increases as the solutions stand, are agitated, or are heated.
Function: pH control agent; leavening agent.

REQUIREMENTS
Identification: A 1:10 aqueous solution gives positive tests for Sodium and for Bicarbonate.
Assay: Not less than 99.0% and not more than 100.5% of NaHCO3 after drying.
Ammonia: Passes test.
Insoluble: Substances Passes test.
Lead: Not more than 2 mg/kg.
Loss on Drying: Not more than 0.25%.

---

Sodium Bicarbonate ACS

Sodium Bicarbonate
Sodium Hydrogen Carbonate ACS
NaHCO3
Formula Wt 84.01
CAS Number 144-55-8

REQUIREMENTS
Assay (dried basis): 99.7-100.3% NaHCO3

MAXIMUM ALLOWABLE
Insoluble matter: 0.015%
Chloride (Cl): 0.003%
Phosphate (PO4): 0.001%
Sulfur compounds (as SO4): 0.003%
Ammonium (NH4): 5 ppm
Heavy metals (as Pb): 5 ppm
Iron (Fe): 0.001%
Calcium (Ca): 0.02%
Magnesium (Mg): 0.005%
Potassium (K): 0.005%

Sodium Bicarbonate BP
Sodium Bicarbonate USP

Sodium Bicarbonate Manufacturers

ANMOL CHEMICALS
S-8, SARIFA MANSION, 2ND FLANK ROAD, CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23770100, 23726950, 23774610, 23723564. FAX: 91-22-23728264

e-mail: anmolc@mtnl.net.in

Cell Call to Anmol: +91-9821870100

Copyright and Usual Disclaimer is Applicable
Last updated 28 April, 2012

--------------

Exports to USA UAE Europe Africa Tanzania Turkey Kenya Dubai etc.

---

The trouble with the Rat Race is

Even if you Win you are still a Rat

---

Old Spice: Manufacturing since more than Three Decades:
Ammonium Chloride -------- Calcium Chloride -------- Magnesium Chloride
Potassium Chloride ------- Sodium Acetate ---------- Sodium Diacetate
Sodium Thiosulphate ------ Zinc Chloride ----------- Magnesium Sulphate

Best Selling IP BP USP FCC ACS Grades of Chemicals by Anmol Chemicals
Ammonium Chloride -------- Benzyl Alcohol ---------- Boric Acid
Borax; Sodium Borate ----- Calcium Chloride -------- Calcium Hydroxide
Calcium Saccharate ------- Citric Acid ------------- Calcium Phosphate
Calcium Oxide ------------ Calcium Sulfate --------- Chromic Chloride
Gentian Violet ----------- Magnesium Chloride ------ Magnesium Sulfate
Maleic Acid -------------- Manganese Chloride ------ Manganese Sulfate
Methylene Blue ----------- Potassium Chloride ------ Potassium Phosphate
Sodium Phosphate --------- Sodium Propionate ------- Sodium Acetate
Sodium Bicarbonate ------- Sodium Hydroxide -------- Sodium Thiosulfate
Zinc Chloride

Other Best Seller Products
Ammonium Bromide --------- Ammonium Sulfate -------- Ammonium Phosphate
Ammonium Persulfate ------ Aluminum Chloride ------- Barium Chloride
Calcium Nitrate Nitrite -- Calcium Propionate ------ Copper Sulfate
Ceric Ammonium Nitrate --- Cupric Chloride --------- Potassium Bromide
Potassium Iodide --------- Potassium Nitrate Nitrite Sodium Nitrite & Nitrate
Sodium Bromide ----------- Isatoic Anhydride ------- Sodium Formaldehyde Bisulfite

Exporters to USA, UAE, Europe, South Africa, Tanzania, Kenya, Egypt, Turkey, Nigeria, Uganda, Brazil, Chile, Argentina, Dubai etc.

Representatives in New York, Houston - Texas, Chicago - Illinois, Los Angeles.

--------------