Group Since 1976
(FDA) GMP Approved ISO-9001:2008 Certified ISO-22000:2005 HACCP "REACH" Pre-registered Kosher Certified Halal Certified

--------------

Anmol Chemicals Group, established in 1976, is the pioneer manufacturer of Sodium acetate, Pharmaceutical, Fragrance & Flavor chemicals in India.  Anmol Chemicals Group has manufacturing facilities spread across Western India, representatives in Houston Chicago USA and toll manufacturers in China. We also have toll manufacturing units for processing chemicals in a few countries around the world. We make IP, BP, USP, Ph. Eur., FCC or Food Grade, ACS, AR or Analytical Reagent Grade, LR or Laboratory Reagent Grade, Pure and Technical Grades of various chemicals. All our items are analyzed to meet the required standards.

Our manufacturing facility is FDA approved and ISO-9001-2008, ISO 22000-2005 HACCP certified. We are offering products manufactured as per Kosher and Halal approved method. We are pre-registered with "Reach" for export to European countries.

 

Sodium Acetate BP Sodium Acetate USP Manufacturers

CAS: 127-09-3 (Anhydrous); 6131-90-4 (Trihydrate)
Chemical Formula: CH3COO-Na
Molecular Weight: 82

Sodium Acetate BP USP ACS AR Food Grade
Sodum Acetate IP Commercial & Pure Grade
MSDS of Sodium Acetate Manufacturers

Sodium Acetate USP Specifications

Sodium Acetate USP
C2H3NaO2·3H2O 136.08

Assay—  Sodium Acetate contains three molecules of water of hydration, or is anhydrous. It contains not less than 99.0 percent and not more than 101.0 percent of C2H3NaO2, calculated on the dried basis.
Packaging and storage— Preserve in tight containers.
Labeling— Label it to indicate whether it is the trihydrate or is anhydrous. Where Sodium Acetate is intended for use in hem dialysis, it is so labeled.
Identification— A solution responds to the test for Sodium and for Acetate.
pH: between 7.5 and 9.2, in a solution in carbon dioxide-free water containing the equivalent of 30 mg of anhydrous sodium acetate per mL.
Loss on drying— Dry at 120 to constant weight: the hydrous form loses between 38.0% and 41.0% of its weight, and the anhydrous form loses not more than 1.0% of its weight.
Insoluble matter— Dissolve the equivalent of 20 g of anhydrous sodium acetate in 150 mL of water, heat to boiling, and digest in a covered beaker on a steam bath for 1 hour. Filter through a tarred filtering crucible, wash thoroughly, and dry at 105 : the weight of the residue does not exceed 10 mg (0.05%).
Chloride— A portion equivalent to 1.0 g of anhydrous sodium acetate shows no more chloride than corresponds to 0.50 mL of 0.020 N hydrochloric acid (0.035%).
Sulfate— A portion equivalent to 10 g of anhydrous sodium acetate shows no more sulfate than corresponds to 0.50 mL of 0.020 N sulfuric acid (0.005%).
Calcium and magnesium— To 20 mL of a solution containing the equivalent of 10 mg of anhydrous sodium acetate per mL add 2 mL each of 6 N ammonium hydroxide, ammonium oxalate TS, and dibasic sodium phosphate TS: no turbidity is produced within 5 minutes.
Potassium— Dissolve the equivalent of 3 g of anhydrous sodium acetate in 5 mL of water, add 1N acetic acid drop wise until the solution is slightly acidic, and then add 5 drops of sodium cobalt nitrite TS: no precipitate is formed.
Aluminum: (where it is labeled as intended for use in hem dialysis)— the limit is 0.2µ =g per g.
Heavy metals—the limit is 0.001%.
Organic volatile impurities: meets the requirements.

---

Sodium Acetate Trihydrate BP Specifications

Sodium Acetate BP
C2H3NaO2,3H2O
Action and use
Used in solutions for dialysis; excipient.

DEFINITION
Sodium ethanoate trihydrate.
Content
99.0 per cent to 101.0 per cent (dried substance).

CHARACTERS
Appearance
Colourless crystals.
Solubility
Very soluble in water, soluble in ethanol (96 per cent).

IDENTIFICATION
A. 1 ml of solution S (see Tests) gives reaction (b) of acetates.
B. 1 ml of solution S gives reaction (a) of sodium.
C. Loss on drying (As shown in the Relevant Test).

TESTS
Solution S
Dissolve 10.0 g in carbon dioxide-free water prepared from distilled water R and dilute to 100 ml 100 ml with the same solvent.
Appearance of solution
Solution S is clear and colourless.
pH
7.5 to 9.0.
Dilute 5 ml of solution S to 10 ml with carbon dioxide-free water.
Reducing substances
Dissolve 5.0 g in 50 ml of water, then add 5 ml of dilute sulphuric acid and 0.5 ml of 0.002 M potassium permanganate. The pink colour persists for at least 1 h. Prepare a blank in the same manner but without the substance to be examined.
Chlorides
Maximum 200 ppm.
Sulphates
Maximum 200 ppm.
Aluminium
Maximum 0.2 ppm, if intended for use in the manufacture of dialysis solutions.
Arsenic
Maximum 2 ppm, determined on 0.5 g.
Calcium and magnesium
Maximum 50 ppm, calculated as Ca.
Heavy metals
Maximum 10 ppm.
Iron
Maximum 10 ppm, determined on 10 ml of solution S.
Loss on drying
39.0 per cent to 40.5 per cent, determined on 1.000 g by drying in an oven at 130C.

---

Sodium Acetate FCC US Food Chemical Codex

C2H3NaO2 Formula wt, anhydrous 82.03
C2H3NaO2·3H2O Formula wt, trihydrate 136.08

DESCRIPTION
Sodium Acetate occurs as colorless, transparent crystals or as a granular, crystalline or white powder. The anhydrous form is hygroscopic; the trihydrate effloresces in warm, dry air. One gram of the anhydrous form dissolves in about 2 mL of water; 1 g of the trihydrate dissolves in about 0.8 mL of water and in about 19 mL of alcohol.
Function: Buffer.

REQUIREMENTS
Identification: A 1:20 aqueous solution gives positive tests for Sodium and for Acetate.
Assay: Not less than 99.0% and not more than 101.0% of C2H3NaO2 after drying.
Alkalinity Anhydrous: Not more than 0.2%; Trihydrate: Not more than 0.05%.
Lead: Not more than 2 mg/kg.
Loss on Drying: Anhydrous: Not more than 1.0%; Trihydrate: Between 36.0% and 41.0%.
Potassium Compounds: Passes test.

---

Sodium Acetate ACS specifications

American Chemical Society Reagent Grade
Sodium Acetate Anhydrous
CH3COONa
Formula Wt 82.03
CAS Number 127-09-3

REQUIREMENTS

Assay: 99.0% C2H3O2Na
pH of a 5% solution: 7.0-9.2 at 25C

MAXIMUM ALLOWABLE

Insoluble matter: 0.01%
Loss on drying at 120C: 1.0%
Chloride (Cl): 0.002%
Phosphate (PO4): 0.001%
Sulfate (SO4): 0.003%
Calcium (Ca): 0.005%
Magnesium (Mg): 0.002%
Heavy metals (as Pb): 0.001%
Iron (Fe): 0.001%

---

Sodium Acetate Trihydrate ACS specifications

American Chemical Society Reagent Grade
NaC2H3O2 . 3H2O
Formula Wt 136.08
CAS Number 6131-90-4

REQUIREMENTS

Assay: 99.0-101% NaC2H3O2 . 3H2O
pH of a 5% solution: 7.5-9.2 at 25C
Substances reducing permanganate: Passes test

MAXIMUM ALLOWABLE

Insoluble matter: 0.005%
Chloride (Cl): 0.001%
Phosphate (PO4): 5 ppm
Sulfate (SO4): 0.002%
Heavy metals (as Pb): 5 ppm
Iron (Fe): 5 ppm
Calcium (Ca): 0.005%
Magnesium (Mg): 0.002%
Potassium (K): 0.005%

Sodium Acetate BP
Sodium Acetate USP
Sodium Acetate Manufacturers

ANMOL CHEMICALS
S-8, SARIFA MANSION, 2ND FLANK ROAD, CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23770100, 23726950, 23774610, 23723564. FAX: 91-22-23728264

e-mail: anmolc@mtnl.net.in

Cell Call to Anmol: +91-9821870100

Copyright and Usual Disclaimer is Applicable
Last updated 28 April, 2012

--------------

Exports to USA UAE Europe Africa Tanzania Turkey Kenya Dubai etc.

---

The trouble with the Rat Race is

Even if you Win you are still a Rat

---

Old Spice: Manufacturing since more than Three Decades:
Ammonium Chloride -------- Calcium Chloride -------- Magnesium Chloride
Potassium Chloride ------- Sodium Acetate ---------- Sodium Diacetate
Sodium Thiosulphate ------ Zinc Chloride ----------- Magnesium Sulphate

Best Selling IP BP USP FCC ACS Grades of Chemicals by Anmol Chemicals
Ammonium Chloride -------- Benzyl Alcohol ---------- Boric Acid
Borax; Sodium Borate ----- Calcium Chloride -------- Calcium Hydroxide
Calcium Saccharate ------- Citric Acid ------------- Calcium Phosphate
Calcium Oxide ------------ Calcium Sulfate --------- Chromic Chloride
Gentian Violet ----------- Magnesium Chloride ------ Magnesium Sulfate
Maleic Acid -------------- Manganese Chloride ------ Manganese Sulfate
Methylene Blue ----------- Potassium Chloride ------ Potassium Phosphate
Sodium Phosphate --------- Sodium Propionate ------- Sodium Acetate
Sodium Bicarbonate ------- Sodium Hydroxide -------- Sodium Thiosulfate
Zinc Chloride

Other Best Seller Products
Ammonium Bromide --------- Ammonium Sulfate -------- Ammonium Phosphate
Ammonium Persulfate ------ Aluminum Chloride ------- Barium Chloride
Calcium Nitrate Nitrite -- Calcium Propionate ------ Copper Sulfate
Ceric Ammonium Nitrate --- Cupric Chloride --------- Potassium Bromide
Potassium Iodide --------- Potassium Nitrate Nitrite Sodium Nitrite & Nitrate
Sodium Bromide ----------- Isatoic Anhydride ------- Sodium Formaldehyde Bisulfite

Exporters to USA, UAE, Europe, South Africa, Tanzania, Kenya, Egypt, Turkey, Nigeria, Uganda, Brazil, Chile, Argentina, Dubai etc.

Representatives in New York, Houston - Texas, Chicago - Illinois, Los Angeles.

--------------