Anmol  Chemicals
Reactor Multi Function Vessels Lab Chemical LabISO 9000 Certified
(FDA) GMP Approved, ISO-9001:2008, ISO-22000:2005 HACCP, "REACH" Pre-registered Kosher & Halal Certified

Home -------------- Contact

Calcium Chloride BP IP USP ACS Analytical Reagent FCC Food Grade Manufacturers

Anmol Chemicals Group, established in 1976, is the pioneer manufacturer of Specialty chemicals, Pharmaceutical Excipients, Fragrance & Flavor chemicals in India. Anmol Chemicals Group has manufacturing facilities spread across Western India, representatives in Houston Chicago USA and toll manufacturers in China. We also have toll manufacturing units for processing chemicals in a few countries around the world. We make IP, BP, USP, Ph. Eur., FCC or Food Grade, ACS, AR or Analytical Reagent Grade, LR or Laboratory Reagent Grade, Pure and Technical Grades of various chemicals. All our items are analyzed to meet the required standards.

Our manufacturing facility is FDA approved and ISO-9001-2008, ISO 22000-2005 HACCP certified. We are offering products manufactured as per Kosher and Halal approved certified method. We are pre-registered with "Reach" for export to European countries. We can give all solid chemical materials as per specified size or shape.

Exporter Importer by Sea Exports by Air Chemical Exporter. Palletized for Export. Liquid Products HDPE Drum Packing of Chemicals Bulk Export Packing Jumbo Bag Packing

CAS No.: 10043-52-4
Molecular Weight: 110.98
Chemical Formula: CaCl2

Please visit Calcium Chloride Commercial Pure Grade Manufacturers

CaCl2 Anhydrous MSDS Sheet

CaCl2 Fused Dihydrate MSDS Sheet

CaCl2 Hexahydrate Solution MSDS Sheet

Calcium Chloride Anhydrous ManufacturersCalcium Chloride Fused ManufacturersCalcium Chloride Dihydrate Manufacturers

Calcium Chloride USP

Calcium Chloride, Dihydrate. USP
CaCl2·2H2O 147.01

Assay— Calcium Chloride contains an amount of CaCl2 equivalent to not less than 99.0 percent and not more than 107.0 percent of CaCl2·2H2O.
Packaging and storage— Preserve in tight containers.
Labeling— Where Calcium Chloride is intended for use in hem dialysis, it is so labeled.
Identification— A solution (1 in 10) responds to the tests for Calcium and for Chloride.
pH: between 4.5 and 9.2, in a solution (1 in 20).
Aluminum (where it is labeled as intended for use in hem dialysis)— the limit is 1 4g per g.
Iron, aluminum, and phosphate— To a solution (1 in 20) add 2 drops of 3 N hydrochloric acid and 1 drop of phenolphthalein TS. Then add ammonium chloride–ammonium hydroxide TS, drop wise, until the solution is faintly pink, add 2 drops in excess, and heat the liquid to boiling: no turbidity or precipitate is produced.
Heavy metals— the limit is 0.001%.
Limit of magnesium and alkali salts— Dissolve 1 g in about 50 mL of water, add 500 mg of ammonium chloride, and proceed as directed in the test for Limit of magnesium and alkali salts under Calcium Carbonate, beginning with “heat the solution, and boil for 1 minute”: the weight of the residue does not exceed 5 mg (1.0%).
Organic volatile impurities meets the requirements.


Calcium Chloride BP Dihydrate Specifications

Calcium Chloride BP Dihydrate
CaCl2,2H2O

DEFINITION
Content
97.0 per cent to 103.0 per cent of CaCl2,2H2O.

CHARACTERS
Appearance
White or almost white, crystalline powder, hygroscopic.
Solubility
Freely soluble in water, soluble in ethanol (96 per cent).

IDENTIFICATION
Solution S (see Tests) gives reaction of chlorides.
It gives the reactions of calcium.
It complies with the limits of the assay.

TESTS
Solution S
Dissolve 10.0 g in carbon dioxide-free water prepared from distilled water and dilute to 100 ml with the same solvent.
Appearance of solution: Solution S is clear and not more intensely colored than reference solution.
Acidity or alkalinity: To 10 ml of freshly prepared solution S add 0.1 ml of phenolphthalein solution. If the solution is red, not more than 0.2 ml of 0.01 M hydrochloric acid is required to discharge the color and if the solution is colorless, not more than 0.2 ml of 0.01 M sodium hydroxide is required to turn it red.
Sulphates: Maximum 300 ppm.
Aluminium: To 10 ml of solution S add 2 ml of ammonium chloride solution R and 1 ml of dilute ammonia and boil the solution. No turbidity or precipitate is formed.
If intended for use in the manufacture of dialysis solutions, the above test is replaced by the test for Aluminium maximum 1 ppm.
Barium: To 10 ml of solution S add 1 ml of calcium Sulphate solution R. After at least 15 min, any opalescence in the solution is not more intense than that in a mixture of 1 ml of distilled water and 10 ml of solution S.
Iron: Maximum 10 ppm, determined on solution S.
Magnesium and alkali metals: Maximum 0.5 per cent.
Heavy metals: Maximum 20 ppm.


Calcium Chloride Hexahydrate BP Specifications

Calcium Chloride BP Hexahydrate
CaCl2,6H2O

DEFINITION
Content
97.0 per cent to 103.0 per cent of CaCl2,6H2O.

CHARACTERS
Appearance
White or almost white, crystalline mass or colorless crystals.
Solubility
Very soluble in water, freely soluble in ethanol (96 per cent).
It solidifies at about 29C.

IDENTIFICATION
Solution S (see Tests) gives reaction of chlorides.
It gives the reactions of calcium.
It complies with the limits of the assay.

TESTS
Solution S
Dissolve 15.0 g in carbon dioxide-free water prepared from distilled water R and dilute to 100 ml with the same solvent.
Appearance of solution: Solution S is clear and not more intensely colored than reference solution.
Acidity or alkalinity: To 10 ml of freshly prepared solution S add 0.1 ml of phenolphthalein solution. If the solution is red, not more than 0.2 ml of 0.01 M hydrochloric acid is required to discharge the color and if the solution is colorless, not more than 0.2 ml of 0.01 M sodium hydroxide is required to turn it red.
Sulphates: Maximum 200 ppm.
Aluminium: To 10 ml of solution S add 2 ml of ammonium chloride solution R and 1 ml of dilute ammonia R1 . Heat to boiling. No turbidity or precipitate is formed. If intended for use in the manufacture of dialysis solutions, the above test is replaced by the test for Aluminium : maximum 1 ppm.
Barium: To 10 ml of solution S add 1 ml of calcium Sulphate solution. After at least 15 min, any opalescence in the solution is not more intense than that in a mixture of 1 ml of distilled water  and 10 ml of solution S.
Iron: Maximum 7 ppm, determined on solution S.
Magnesium and alkali metals: Maximum 0.3 per cent.
Heavy metals Maximum 15 ppm.


Calcium Chloride Injection as per USP Specifications

Calcium Chloride

Calcium Chloride Injection is a sterile solution of Calcium Chloride in Water for Injection. It contains not less than 95.0 percent and not more than 105.0 percent of the labeled amount of CaCl2·2H2O.

Packaging and storage— Preserve in single-dose containers, preferably of Type I glass.
Identification— It responds to the tests for Calcium and Chloride.
Bacterial end toxins— It contains not more than 0.2 USP End toxin Unit per mg of calcium chloride.
pH: between 5.5 and 7.5 in the undiluted Injection, except where the concentration is greater than 1 in 20, in which case this range applies to the Injection diluted with water to yield a concentration of 1 in 20.
Particulate matter: meets the requirements for small-volume injections.
Other requirements— It meets the requirements under Injections 1.


Calcium Chloride FCC US Food Chemical Codex

CaCl2 Formula wt, anhydrous 110.98
CaCl2·2H2O Formula wt, dihydrate 147.01
Calcium Chloride

DESCRIPTION
Calcium Chloride occurs as white, hard fragments, granules, or powder. It is anhydrous or contains two molecules of water of hydration. It is deliquescent. It is soluble in water and slightly soluble in alcohol. The pH of a 1:20 aqueous solution is between 4.5 and 11.0.
Function Firming agent.

REQUIREMENTS
Labeling: Indicate whether it is anhydrous or the dihydrate.
Identification: A 1:10 aqueous solution gives positive tests for Calcium and for Chloride.
Assay: Anhydrous: Not less than 93.0% and not more than 100.5% of CaCl2; Dihydrate: Not less than 99.0% and not more than 107.0% of CaCl2·2H2O.
Acid-Insoluble Matter Anhydrous: Not more than 0.02%; no particles per kilogram of sample greater than 2 mm in any dimension.
Arsenic: Not more than 3 mg/kg.
Fluoride: Not more than 0.004%.
Lead: Not more than 5 mg/kg.
Magnesium and Alkali Salts Anhydrous: Not more than 5.0%; Dihydrate: Not more than 4.0%.


Calcium Chloride Solution FCC Food Grade; US Food Chemical Codex

Calcium Chloride

DESCRIPTION
Calcium Chloride Solution occurs as a clear to slightly turbid, colorless or slightly colored liquid at room temperature. It is normally available in a concentration range of about 35% to 45% of CaCl2.
Function: Sequestrant; firming agent.

REQUIREMENTS
Identification: When diluted to a concentration of about 1:10 (CaCl2 basis), a sample gives positive tests for Calcium and for Chloride.
Assay: Not less than 90.0% and not more than 110.0%, by weight, of the labeled amount of calcium chloride, expressed as CaCl2.
Alkalinity [as Ca(OH)2]: Not more than 0.3%.
Fluoride: Not more than 0.004%, calculated on the amount of CaCl2 as determined in the Assay.
Lead: Not more than 4 mg/kg, calculated on the amount of CaCl2 as determined in the Assay.
Magnesium and Alkali Salts: Not more than 5.0%, calculated on the amount of Calcium Chloride as determined in the Assay.


Calcium Chloride Dihydrate ACS Analytical Reagent

CaCl2 . 2H2O
Formula Wt 147.01
CAS Number 10035-04-8
Calcium Chloride

REQUIREMENTS
Assay: 99.0-105.0% CaCl2 - 2H2O
pH of a 5% solution: 4.5-8.5 at 25C

MAXIMUM ALLOWABLE
Insoluble matter: 0.01%
Oxidizing substances (as NO3): 0.003%
Sulfate (SO4): 0.01%
Ammonium (NH4): 0.005%
Barium (Ba): 0.005%
Heavy metals (as Pb): 5 ppm
Iron (Fe): 0.001%
Magnesium (Mg): 0.005%
Potassium (K): 0.01%
Sodium (Na): 0.02%
Strontium (Sr): 0.1%


Calcium Chloride Desiccant

CaCl2
Formula Wt 110.98
CAS Number 10043-52-4

REQUIREMENTS
Assay: 96.0% CaCl2

MAXIMUM ALLOWABLE
Titrable base: 0.006 meq/g

Logo

Manufacturers

ANMOL CHEMICALS
S-8, SARIFA MANSION, 2ND FLANK ROAD, CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFF) 91-22-23726950, 23774610, 23723564. FAX: 91-22-23728264

e-mail: info@anmol.org

Copyright and Usual Disclaimer is Applicable
Last updated 28-may-16

Calcium Chloride in Jumbo Bags Drum Packing Paletized and Shrink Wrapped Packing for Exports to USA UAE Africa Tanzania Turkey Kenya Dubai

Exporters to USA, Canada, UAE, Europe, South Africa, Tanzania, Kenya, Egypt, Turkey, Nigeria, Uganda, Brazil, Chile, Argentina, Dubai, Cameroon, Mexico, Brazil, Chile, Argentina, Korea, Thailand, Malaysia, Indonesia, Australia, China, Germany, France, etc.

Representatives in New York, Houston - Texas, Chicago - Illinois, Los Angeles.

Fast Selling IP BP USP ACS FCC Food Grades of Chemicals by Anmol Chemicals
Ammonium Chloride -------- Benzyl Alcohol ---------- Boric Acid
Borax; Sodium Borate ----- Calcium Chloride -------- Calcium Hydroxide
Calcium Saccharate ------- Citric Acid ------------- Calcium Phosphate
Calcium Oxide ------------ Calcium Sulfate --------- Chromic Chloride
Gentian Violet ----------- Magnesium Chloride ------ Magnesium Sulfate
Maleic Acid -------------- Manganese Chloride ------ Manganese Sulfate
Methylene Blue ----------- Potassium Chloride ------ Potassium Phosphate
Potassium Bitartrate ----- Sodium Phosphate -------- Sodium Propionate
Sodium Acetate ----------- Sodium Bicarbonate ------ Sodium Hydroxide
Sodium Thiosulfate ------- Zinc Chloride

Calcium Chloride Anhydrous
BP USP NF IP ACS AR Analytical Reagent FCC Food Grade

Calcium Chloride Anhydrous

Calcium Chloride Fused
BP USP NF IP ACS AR Analytical Reagent FCC Food Grade
Calcium Chloride Fused

Calcium Chloride Dihydrate
BP USP NF IP ACS AR Analytical Reagent FCC Food Grade
Calcium Chloride Dihydrate