Group Since 1976
(FDA) GMP Approved ISO-9001:2008 Certified ISO-22000:2005 HACCP "REACH" Pre-registered Kosher Certified Halal Certified

--------------

Anmol Chemicals Group, established in 1976, is the pioneer manufacturer of Zinc Chloride, Pharmaceutical, Fragrance & Flavor chemicals in India.  Anmol Chemicals Group has manufacturing facilities spread across Western India, representatives in Houston Chicago USA and toll manufacturers in China. We also have toll manufacturing units for processing chemicals in a few countries around the world. We make IP, BP, USP, Ph. Eur., FCC or Food Grade, ACS, AR or Analytical Reagent Grade, LR or Laboratory Reagent Grade, Pure and Technical Grades of various chemicals. All our items are analyzed to meet the required standards.

Our manufacturing facility is FDA approved and ISO-9001-2008, ISO 22000-2005 HACCP certified. We are offering products manufactured as per Kosher and Halal approved method. We are pre-registered with "Reach" for export to European countries.

Zinc Chloride Manufacturers USP BP IP ACS

Synonyms: Zinc Dichloride, Zinc Butter
CAS No.: 7646-85-7
Molecular Weight: 136.30
Chemical Formula: ZnCl2

Zinc Chloride BP USP IP ACS AR Analytical Reagent
Zinc Chloride Anhydrous Solutiion Commercial Grade
MSDS of Zinc Chloride Manufacturers

  

Zinc Chloride USP

Zinc Chloride USP ZnCl2 136.30

Assay—  Zinc Chloride contains not less than 97.0 percent and not more than 100.5 percent of ZnCl2.
Packaging and storage— Preserve in tight containers.
Identification— A solution of it responds to the tests for Zinc and for Chloride.
Limit of oxychloride— Dissolve 1.0 g in 20 mL of water, add 20 mL of alcohol, and mix. To 10 mL of the mixture add 0.30 mL of 1.0 N hydrochloric acid: the solution becomes perfectly clear.
Sulfate— Dissolve 1.0 g in 30 mL of water: 20 mL of this solution shows no more sulfate than corresponds to 0.20 mL of 0.020 N sulfuric acid (0.03%).
Limit of ammonium salts— To 5 mL of a solution (1 in 10) add 1 N sodium hydroxide until the precipitate first formed is re-dissolved, and then warm the solution: no odor of ammonia is perceptible.
Lead— Dissolve 0.50 g in 5 mL of water, and transfer the solution to a color-comparison tube (A). Add 15 mL of Potassium Cyanide Solution (1 in 10), mix, and allow the mixture to become clear. In a similar, matched color-comparison tube (B) place 5 mL of water, and add 2.50 mL of Standard Lead Solution (see Heavy Metals 231 ) and 15 mL of Potassium Cyanide Solution (1 in 10). Add to the solution in each tube 0.1 mL of sodium sulfide TS. Mix the contents of each tube, and allow to stand for 5 minutes: viewed downward over a white surface, the solution in tube A is not darker than that in tube B (indicating not more than 0.005% of lead).
Alkalies and alkaline earths— Dissolve 2.0 g in about 150 mL of water contained in a 200-mL volumetric flask. Add sufficient ammonium sulfide TS to precipitate the zinc completely, dilute with water to volume, and mix. Filter through a dry filter, and reject the first portion of the filtrate. To 100 mL of the subsequent filtrate add 5 drops of sulfuric acid, evaporate to dryness, and ignite: the weight of the residue does not exceed 10 mg (1.0%).
Organic volatile impurities: meets the requirements

---

Zinc Chloride BP Specifications

Zinc Chloride BP ZnCl2

DEFINITION
Content
95.0 per cent to 100.5 per cent.

CHARACTERS
Appearance
White or almost white, crystalline powder or cast in white or almost white sticks, deliquescent.
Solubility
Very soluble in water, freely soluble in ethanol (96 per cent) and in glycerol.

IDENTIFICATION
A. Dissolve 0.5 g in dilute nitric acid R and dilute to 10 ml with the same acid. The solution gives reaction of chlorides.
B 5 ml of solution S gives the reaction of zinc.

TESTS

Solution S
To 2.0 g add 38 ml of carbon dioxide-free water R prepared from distilled water  and add dilute hydrochloric acid  drop wise until dissolution is complete. Dilute to 40 ml with carbon dioxide-free water  prepared from distilled water.
pH
4.6 to 5.5.
Dissolve 1.0 g in 9 ml of carbon dioxide-free water, ignoring any slight turbidity.
Oxychloride
Dissolve 1.5 g in 1.5 ml of carbon dioxide-free water R. The solution is not more opalescent than reference suspension. Add 7.5 ml of ethanol (96 per cent). The solution may become cloudy within 10 min. Any cloudiness disappears on the addition of 0.2 ml of dilute hydrochloric acid.
Sulphates
Maximum 200 ppm.
Aluminium, calcium, heavy metals, iron, magnesium
To 8 ml of solution S add 2 ml of concentrated ammonia R and shake. The solution is clear and colourless. Add 1 ml of disodium hydrogen phosphate solution. The solution remains clear for at least 5 min. Add 0.2 ml of sodium sulphide solution. A white precipitate is formed and the supernatant liquid remains colourless.
Ammonium
Maximum 400 ppm.

---

Zinc Chloride Injection USP Specifications

Zinc Chloride Injection is a sterile solution of Zinc Chloride in Water for Injection. It contains not less than 90.0 percent and not more than 110.0 percent of the labeled amount of zinc (Zn).
Packaging and storage— Preserve Zinc Chloride in single-dose or multiple-dose containers, preferably of Type I or Type II glass.
Labeling— Label the Injection to indicate that it is to be diluted with Water for Injection or other suitable fluid to appropriate strength prior to administration.
Identification— The Assay preparation prepared as directed in the Assay exhibits an absorption maximum at about 213.8 nm, when determined as directed in the Assay.
Bacterial endotoxins— It contains not more than 25.0 USP Endotoxin Units per mg of zinc.
pH: between 1.5 and 2.5.
Particulate matter: meets the requirements for small-volume injections.
Other requirements— It meets the requirements under Injections 1

---

Zinc Chloride ACS specifications

American Chemical Society Reagent Grade
Zinc Chloride ZnCl2
Formula Wt 136.30
CAS Number 7646-85-7

REQUIREMENTS
Assay ........................... 97.0% ZnCl₂ Zinc Chloride

MAXIMUM ALLOWABLE
Oxychloride ................... Passes test
Insoluble matter .............. 0.005%
Nitrate (NO₃) ................ 0.003%
Sulfate (SO₄) ................. 0.01%
Ammonium (NH₄) .......... 0.005%
Calcium (Ca) .................. 0.06%
Iron (Fe) ........................ 0.001%
Lead (Pb) ...................... 0.005%
Magnesium (Mg) ............ 0.01%
Potassium (K) ................ 0.02%
Sodium (Na) .................. 0.05%

Zinc Chloride is used for Friedel Craft Reaction, Azotropic or Azeotropic Distillation & Desiccation.

Zinc Chloride BP
Zinc Chloride USP

Zinc Chloride Manufacturers Anhydrous Solution

ANMOL CHEMICALS
S-8, SARIFA MANSION, 2ND FLANK ROAD, CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23770100, 23726950, 23774610, 23723564. FAX: 91-22-23728264

e-mail: anmolc@mtnl.net.in

Cell Call to Anmol: +91-9821870100

Copyright and Usual Disclaimer is Applicable
Last updated 28 April, 2012

--------------

Exports to USA UAE Europe Africa Tanzania Turkey Kenya Dubai etc.

---

The trouble with the Rat Race is

Even if you Win you are still a Rat

---

Old Spice: Manufacturing since more than Three Decades:
Ammonium Chloride -------- Calcium Chloride -------- Magnesium Chloride
Potassium Chloride ------- Sodium Acetate ---------- Sodium Diacetate
Sodium Thiosulphate ------ Zinc Chloride ----------- Magnesium Sulphate

Best Selling IP BP USP FCC ACS Grades of Chemicals by Anmol Chemicals
Ammonium Chloride -------- Benzyl Alcohol ---------- Boric Acid
Borax; Sodium Borate ----- Calcium Chloride -------- Calcium Hydroxide
Calcium Saccharate ------- Citric Acid ------------- Calcium Phosphate
Calcium Oxide ------------ Calcium Sulfate --------- Chromic Chloride
Gentian Violet ----------- Magnesium Chloride ------ Magnesium Sulfate
Maleic Acid -------------- Manganese Chloride ------ Manganese Sulfate
Methylene Blue ----------- Potassium Chloride ------ Potassium Phosphate
Sodium Phosphate --------- Sodium Propionate ------- Sodium Acetate
Sodium Bicarbonate ------- Sodium Hydroxide -------- Sodium Thiosulfate
Zinc Chloride

Other Best Seller Products
Ammonium Bromide --------- Ammonium Sulfate -------- Ammonium Phosphate
Ammonium Persulfate ------ Aluminum Chloride ------- Barium Chloride
Calcium Nitrate Nitrite -- Calcium Propionate ------ Copper Sulfate
Ceric Ammonium Nitrate --- Cupric Chloride --------- Potassium Bromide
Potassium Iodide --------- Potassium Nitrate Nitrite Sodium Nitrite & Nitrate
Sodium Bromide ----------- Isatoic Anhydride ------- Sodium Formaldehyde Bisulfite

Exporters to USA, UAE, Europe, South Africa, Tanzania, Kenya, Egypt, Turkey, Nigeria, Uganda, Brazil, Chile, Argentina, Dubai etc.

Representatives in New York, Houston - Texas, Chicago - Illinois, Los Angeles.

--------------