(FDA) GMP Approved, ISO-9001:2008, ISO-14001, ISO OHSAS-18001, HACCP, FSSC 220000, FSSAI, "REACH" Pre-registered Kosher & Halal Certified
Search for the supplies that you need here:
Ferric Oxide SDS of Manufacturers Suppliers
Anmol Chemicals Group, established in 1976, is the pioneer manufacturer of Specialty chemicals, Pharmaceutical Excipients, Fragrance & Flavor chemicals in India. Anmol Chemicals Group has manufacturing facilities spread across Western India, representatives in Houston Chicago USA and toll manufacturers in China. We also have toll manufacturing units for processing chemicals in a few countries around the world. We make IP, BP, USP, Ph. Eur., FCC or Food Grade, ACS, AR or Analytical Reagent Grade, LR or Laboratory Reagent Grade, Pure and Technical Grades of various chemicals. All our items are analyzed to meet the required standards.
Our manufacturing facility is FDA approved and GMP, ISO-9001-2008, ISO-14001, ISO OHSAS 18000, ISO 22000-2005 HACCP, FSSAI, FSSC-22000, certified. We are offering products manufactured as per Kosher and Halal approved certified method. We are pre-registered with "Reach" for export to European countries. We can give all solid chemical materials as per specified size or shape.
Ferric Oxide, Iron III Oxide Specifications of Manufacturers
Ferric Oxide or Iron III Oxide SDS MSDS Sheet, Material Safety Data Sheet
Section 1: Chemical Product and Identification
Product Name: Ferric Oxide or Iron III Oxide.
EINECS EC-No.: 215-168-2
Chemical Formula: Fe2O3
Molecular Weight: 159.69
Intended Use: Laboratory and Industrial Manufacturing.
Section 2: Hazards Identification
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008
Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
This substance is not classified as dangerous according to Directive 67/548/EEC.
Labeling according to GHS & Regulation (EC) No 1272/2008
GHS Label Elements
Signal Word: None
Not considered hazardous by the OSHA Hazard Communication Standard (29 CFR 1910.1200)
Hazards not otherwise classified (HNOC):
May causes mild skin irritation.
May Causes mild eye irritation and mechanical damage.
P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
P302+P352 - IF ON SKIN: Wash with plenty of soap and water.
P303+P361+P353 - IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
P304 + P340 - IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+313: If eye irritation persists get medical advice/attention.
Section 3: Composition and Information on Ingredients
Composition: Ferric Oxide
EINECS EC-No.: 215-168-2
% by Weight: 100
Section 4: First Aid Measures
Always seek medical attention after first aid measures are provided.
Eye Contact: In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Get medical attention.
Skin Contact: In case of contact, immediately flush skin with plenty of water. Cover the irritated skin with an emollient. Thoroughly clean shoes and clothes before reuse. Get medical attention.
Inhalation: If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Ingestion: Do NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. If large quantities of this material are swallowed, call a physician immediately.
Section 5: Fire and Explosion Data
Flammability of the Product: Not applicable.
Products of Combustion: Some metallic oxides.
Explosion Hazards in Presence of Various Substances: Slightly explosive in presence of open flames and sparks. Non-explosive in presence of shocks.
Fire Fighting Media and Instructions: Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Section 6: Accidental Release Measures
Small Spill: Use appropriate tools to put the spilled solid in a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and dispose of according to legal authority requirements.
Large Spill: Use a shovel to put the material into a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and allow drain.
Section 7: Handling and Storage
Precautions: Keep away from heat. Keep away from sources of ignition. Do not breathe dust.
Storage: Keep in container tightly closed. Keep container in a cool, well-ventilated area.
Section 8: Exposure Controls/Personal Protection
Exposure Limits: United States OSHA: 10 mg/m3 TWA. United Kingdom, WEL - TWA: 5 mg/m3 TWA (fume, as Fe); 10 mg/m3.
Engineering Controls: Use process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels below recommended exposure limits. If user operations generate dust, fume or mist, use ventilation to keep exposure to airborne contaminants below the exposure limit.
Personal Protection: Safety glasses. Lab coat. Dust respirator. Be sure to use an approved/certified respirator or equivalent. Gloves.
Section 9: Physical and Chemical Properties
Physical state and appearance: Rust colored solid.
Taste: Not available.
Chemical Formula: Fe2O3
Molecular Weight: 159.69
pH (1% soln/water): Not available.
Melting Point: 1538 deg C
Specific Gravity: 5.2
Solubility: Insoluble in water.
Section 10: Stability and Reactivity Data
Stability: It is stable.
Incompatibility with various substances: Contact with incompatible materials. Heat, sparks, flames. Avoid dust formation.
Polymerization: Will not occur.
Section 11: Toxicological Information
Toxicity to Animals:
LD50/oral/rat = > 10,000 mg/kg(Diiron trioxide).
Carcinogenicity: No component of this product present at levels greater than or equal to 0.1% is identified as probable or confirmed human carcinogen by IARC, ACGIH, OSHA and NTP.
Mutagenic Effects: Not available.
Teratogenic Effects: Not available.
Environmental Toxicity: Not available.
Section 12: Ecological Information
Products of Biodegradation: Possibly hazardous short term degradation products are not likely. However, long term degradation products may arise.
Results of PBT and vPvB assessment: This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.
Section 13: Disposal Considerations
Waste Disposal: Waste must be disposed of in accordance legal regulations.
Section 14: Transport Information
DOT (USA) & ADR/RID: Not dangerous goods
TDG/IMDG: Not dangerous goods
IATA: Not dangerous goods
Section 15: Other Regulatory Information
OSHA: Not considered hazardous by the OSHA Hazard Communication Standard
Section 313 (Specific toxic chemical listings): Substance is not listed.
TSCA (Toxic Substances Control Act): CAS# 1309-37-1 is listed on the TSCA Inventory.
Canada: CAS# 1309-37-1 is listed on Canada's DSL List
EINECS EC-No.: 215-168-2
Section 16 - Additional Information
Our company provides this MSDS sheet in good faith but makes no representation as to its comprehensiveness or accuracy. This SDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. The above information has been compiled from various sources and has the possibility of discrepancy and being out-dated information. Individuals receiving the information must exercise their independent judgment and do further search in determining its appropriateness for a particular purpose. In no case shall our company be liable to loss or damages by the product user.
Taloja Mumbai and Ankleshwar Gujarat, INDIA
Representatives in Houston, Chicago and New York, USA
TEL: (OFF) 91-22-23726950, 23774610, 23723564
Copyright and Usual Disclaimer is Applicable
Last updated 28-jun-18
Exporters to USA, Canada, UAE, Europe, South Africa, Tanzania, Kenya, Egypt, Turkey, Nigeria, Uganda, Brazil, Chile, Argentina, Dubai, Cameroon, Mexico, Brazil, Chile, Argentina, Korea, Thailand, Malaysia, Indonesia, Australia, China, Germany, France, etc.
Representatives in New York, Houston - Texas, Chicago - Illinois, Los Angeles.
Fast Selling IP BP USP ACS FCC Food Grades of Chemicals by Anmol Chemicals
Acetic Acid Glacial --- Aluminum Chloride --- Ammonium bicarbonate --- Ammonium Carbonate --- Ammonium Chloride --- Benzoic Acid --- Benzyl Alcohol --- Boric Acid --- Borax; Sodium Borate --- Calcium Butyrate --- Calcium Carbonate --- Calcium Chloride --- Calcium Hydroxide --- Calcium Saccharate --- Carbamide Peroxide --- Calcium Oxide --- Calcium Sulfate --- Chromic Chloride --- Copper Sulfate --- Cupric Chloride --- Ferric Chloride --- Fumaric Acid --- Magnesium Butyrate --- Magnesium Chloride --- Magnesium Sulfate --- Malic Acid --- Maleic Acid --- Manganese Chloride --- Manganese Sulfate --- Octyldodecanol --- Oleic acid --- Phenylethyl Alcohol --- Propylene Carbonate --- Potassium Bromide --- Potassium Bicarbonate --- Potassium Carbonate --- Potassium Chloride --- Potassium Hydroxide Pellets --- Potassium Acetate --- Potassium Alum --- Potassium Iodate --- Potassium Iodide --- Selenious Acid --- Sodium Acetate --- Sodium Butyrate --- Sodium Bicarbonate --- Sodium Chloride --- Sodium Molybdate --- Sodium Selenite --- Sodium Perborate --- Sodium Hydroxide --- Sodium Sulphate --- Sodium Sulfide --- Sodium Thiosulfate --- Urea --- Zinc Chloride --- Zinc Sulphate ---
Other Best Selling Products
Ammonium Persulfate --- Butylated Hydroxyanisole --- Butylated Hydroxytoluene --- Encapsulated Fumaric Acid --- Sodium Bromate --- Sodium Diacetate --- TBHQ