(FDA) GMP Approved, ISO-9001:2008, ISO-14001, ISO OHSAS-18001, HACCP, FSSC 220000, FSSAI, "REACH" Pre-registered Kosher & Halal Certified
Sodium Picosulfate USP BP Grade Manufacturers
Anmol Chemicals Group, established in 1976, is the pioneer manufacturer of Specialty chemicals, Pharmaceutical Excipients, Fragrance & Flavor chemicals in India. Anmol Chemicals Group has manufacturing facilities spread across Western India, representatives in Houston Chicago USA and toll manufacturers in China. We also have toll manufacturing units for processing chemicals in a few countries around the world. We make IP, BP, USP, Ph. Eur., FCC or Food Grade, ACS, AR or Analytical Reagent Grade, LR or Laboratory Reagent Grade, Pure and Technical Grades of various chemicals. All our items are analyzed to meet the required standards.
Our manufacturing facility is FDA approved and GMP, ISO-9001-2008, ISO-14001, ISO OHSAS 18000, ISO 22000-2005 HACCP, FSSAI, FSSC-22000, certified. We are offering products manufactured as per Kosher and Halal approved certified method. We are pre-registered with "Reach" for export to European countries. We can give all solid chemical materials as per specified size or shape.
Sodium Picosulfate SDS of Manufacturers
CAS Number: 10040-45-6, Molecular Weight: 481.41, Chemical Formula: C18H13NNa2O8S2, EINECS EC Number: 233-120-9, FEMA: ----,
Sodium picosulfate also known as sodium picosulphate is a contact stimulant laxative used as a treatment for constipation or to prepare the large bowel before colonoscopy or surgery.
Sodium Picosulfate BP Grade
C18H13NNa2O8S2,H2O --- 499.4 --- 10040-45-6
Action and use: Stimulant laxative.
Sodium picosulfate contains not less than 98.5 per cent and not more than the equivalent of 100.5 per cent of 4,4¢-(pyridin-2-ylmethylene)bisphenyl bis(sodium sulphate), calculated with reference to the anhydrous substance.
A white or almost white, crystalline powder, freely soluble in water, slightly soluble in alcohol.
First identificationiA, E.
Second identificationiB, C, D, E.
A. Examine by infrared absorption spectrophotometry (2.2.24), comparing with the spectrum obtained with sodium picosulfate CRS. Examine the substances prepared as discs.
B. Examine the chromatograms obtained in the test for related substances in ultraviolet light at 254 nm. The principal spot in the chromatogram obtained with test solution (b) is similar in position and size to the principal spot in the chromatogram obtained with reference solution (a).
C. To 5 ml of solution S (see Tests) add 1 ml of dilute hydrochloric acid and heat to boiling. Add 1 ml of barium chloride solution. A white precipitate is formed.
D. To about 10 mg add 3 ml of sulphuric acid and 0.1 ml of potassium dichromate solution
R1. A violet colour develops.
E. The solution S gives reaction (a) of sodium (2.3.1).
Solution S: Dissolve 2.5 g in distilled water R and dilute to 50 ml with the same solvent.
Appearance of solution: Solution S is clear and not more intensely coloured than reference.
Acidity or alkalinity: To 10 ml of solution S add 0.05 ml of phenolphthalein solution. The solution is colourless. Not more than 0.25 ml of 0.01 M sodium hydroxide is required to change the colour of the indicator to pink.
Related substances: To pass the test.
Chlorides: Dilute 5 ml of solution S to 15 ml with water. The solution complies with the limit test for chlorides (200 ppm).
Sulphates: Dilute 7.5 ml of solution S to 15 ml with distilled water R. The solution complies with the limit test for sulphates (400 ppm).
Heavy metals: 12 ml of solution S complies with limit test A for heavy metals (20 ppm).
Water: 3.0 per cent to 5.0 per cent, determined on 0.500 g by the semi-micro determination of water.
Dissolve 0.400 g in 80 ml of methanol. Titrate with 0.1 M perchloric acid, determining the end-point potentiometrically.
1 ml of 0.1 M perchloric acid is equivalent to 48.14 mg of C18H13NNa2O8S2.
A. R = SO3Na: 4-[(pyridin-2-yl)(4-hydroxyphenyl)methyl]phenyl sodium sulphate,
B. R = H: 4,4¢-[(pyridin-2-yl)methylene]bisphenol.
Sodium Picosulfate USP Grade
C18H13NNa2O8S2-H2O --- 499.42
C18H13NNa2O8S2 --- 481.41
4,4′-(2-Pyridylmethylene)diphenyl bis(hydrogen sulfate) disodium salt, monohydrate;
4,4′-(Pyridin-2-ylmethylene)bisphenyl bis(sodium sulfate), monohydrate --- [10040-45-6]; UNII: VW106606Y8.
Sodium Picosulfate contains NLT 98.5% and NMT 100.5% of sodium picosulfate (C18H13NNa2O8S2), calculated on the anhydrous basis.
A. Infrared Absorption
B. Identification Tests—General, Sodium: Meets the requirements for the pyroantimonate precipitate test
Sample solution: Dissolve 400 mg of Sodium Picosulfate in 80 mL of methanol.
Analysis: Titrate with 0.1 N perchloric acid determining the endpoint potentiometrically. Perform a blank determination, and make any necessary correction. Each mL of 0.1 N perchloric acid is equivalent to 48.14 mg of sodium picosulfate (C18H13NNa2O8S2).
Acceptance criteria: 98.5%–100.5% on the anhydrous basis
Chloride and Sulfate, Chloride: A 1.0-g portion shows no more chloride than corresponds to 0.30 mL of 0.020 N hydrochloric acid: NMT 0.02%.
Chloride and Sulfate, Sulfate: A 500-mg portion shows no more sulfate than corresponds to 0.20 mL of 0.020 N sulfuric acid: NMT 0.04%.
Organic Impurities: To pass the tests
Acidity and Alkalinity: To 10 mL of the portion of Sample solution retained from the test for Color of Solution add a drop of phenolphthalein. The solution is colorless. NMT 0.25 mL of 0.01 N sodium hydroxide is required to change the color of the indicator to pink.
Taloja Mumbai and Ankleshwar Gujarat, INDIA
Representatives in Houston, Chicago and New York, USA
TEL: (OFF) 91-22-23726950, 23774610, 23723564
Copyright and Usual Disclaimer is Applicable
Last updated 23-jan-18
Exporters to USA, Canada, UAE, Europe, South Africa, Tanzania, Kenya, Egypt, Turkey, Nigeria, Uganda, Brazil, Chile, Argentina, Dubai, Cameroon, Mexico, Brazil, Chile, Argentina, Korea, Thailand, Malaysia, Indonesia, Australia, China, Germany, France, etc.
Representatives in New York, Houston - Texas, Chicago - Illinois, Los Angeles.
Fast Selling IP BP USP ACS FCC Food Grades of Chemicals by Anmol Chemicals
Aluminum Chloride --- Ammonium Chloride --- Ammonium Molybdate --- Benzyl Alcohol --- Bismuth Citrate --- Boric Acid --- Borax; Sodium Borate --- Calcium Butyrate --- Calcium Carbonate --- Calcium Chloride --- Calcium Hydroxide --- Calcium Saccharate --- Carbamide Peroxide --- Carmellose Calcium --- Carmellose Sodium --- Calcium Oxide --- Calcium Sulfate --- Chromic Chloride --- Copper Sulfate --- Cupric Chloride --- Ferric Chloride --- Fumaric Acid ---Magnesium Butyrate --- Magnesium Chloride --- Magnesium Sulfate --- Magnesium Oxide --- Malic Acid --- Maleic Acid --- Manganese Chloride --- Manganese Sulfate --- Propylene Carbonate --- Potassium Bromide --- Potassium Chloride --- Potassium Hydroxide Pellets --- Potassium Alum --- Sodium Acetate --- Sodium Butyrate --- Sodium Molybdate --- Sodium Perborate --- Sodium Hydroxide --- Sodium Sulphate --- Sodium Thiosulfate --- Urea --- Zinc Chloride --- Zinc Sulphate ---
Other Best Selling Products
Ammonium Persulfate --- Butylated Hydroxyanisole --- Butylated Hydroxy Toluene --- Ceric Ammonium Nitrate --- Encapsulated Fumaric Acid --- Picric Acid --- Sodium Diacetate --- TBHQ.
Sodium Picosulphate BP Ph Eur USP Grade