(FDA) GMP Approved, ISO-9001:2008, ISO-14001, ISO OHSAS-18001, HACCP, FSSC 220000, FSSAI, "REACH" Pre-registered Kosher & Halal Certified
Sodium Iodide USP BP IP ACS Analytical Reagent Grade Manufacturers
Anmol Chemicals Group, established in 1976, is the pioneer manufacturer of Specialty chemicals, Pharmaceutical Excipients, Fragrance & Flavor chemicals in India. Anmol Chemicals Group has manufacturing facilities spread across Western India, representatives in Houston Chicago USA and toll manufacturers in China. We also have toll manufacturing units for processing chemicals in a few countries around the world. We make IP, BP, USP, Ph. Eur., FCC or Food Grade, ACS, AR or Analytical Reagent Grade, LR or Laboratory Reagent Grade, Pure and Technical Grades of various chemicals. All our items are analyzed to meet the required standards.
Our manufacturing facility is FDA approved and GMP, ISO-9001-2008, ISO-14001, ISO OHSAS 18000, ISO 22000-2005 HACCP, FSSAI, FSSC-22000, certified. We are offering products manufactured as per Kosher and Halal approved certified method. We are pre-registered with "Reach" for export to European countries. We can give all solid chemical materials as per specified size or shape.
Sodium Iodide SDS of Manufacturers
CAS Number: 7681-82-5(anhydrous), 13517-06-1(dihydrate), Molecular Weight: 149.89, Chemical Formula: NaI, EINECS EC Number: 231-679-3, FEMA: ----,
Sodium Iodide USP
NaI -- 149.89 -- [7681-82-5].
Sodium Iodide contains not less than 99.0 percent and not more than 101.5 percent of NaI, calculated on the anhydrous basis.
Identification: A solution (1 in 20) responds to the tests for Sodium and for Iodide.
Alkalinity: Dissolve 1.0 g in 10 mL of water, and add 0.15 mL of 0.10 N sulfuric acid: no red color is produced by the addition of 1 drop of phenolphthalein TS.
Water: not more than 2.0%.
Iodate: It meets the requirements of the test for Iodate under Potassium Iodide, 100 mg of Sodium Iodide being used in the control.
Thiosulfate and barium: It meets the requirements of the test for Thiosulfate and barium under Potassium Iodide.
Potassium: A solution of 1.0 g in 2 mL of water yields no precipitate with 1.0 mL of sodium bitartrate TS.
Heavy metals: Dissolve 2.0 g in 25 mL of water: the limit is 0.001%.
Limit of nitrate, nitrite, and ammonia: Add 5 mL of 1 N sodium hydroxide and about 200 mg of aluminum wire to a solution of 1.0 g of Sodium Iodide in 5 mL of water, contained in a test tube of about 40-mL capacity. Insert a pledget of purified cotton in the upper portion of the test tube, and place a piece of moistened red litmus paper over the mouth of the tube. Heat in a steam bath for 15 minutes: no blue coloration of the paper is discernible.
Assay: Weigh accurately about 500 mg of Sodium Iodide, and dissolve in about 10 mL of water. Add 35 mL of hydrochloric acid, and titrate with 0.05 M potassium iodate VS until the dark brown solution which is produced becomes pale brown. Add 1 mL of amaranth TS, and continue the titration slowly until the red color just changes to yellow. Each mL of 0.05 M potassium iodate is equivalent to 14.99 mg of NaI.
Sodium Iodide BP (Ph Eur monograph 0196)
NaI -- 149.9 -- 7681-82-5
Content: 99.0 per cent to 100.5 per cent (dried substance).
Appearance: White or almost white, crystalline powder or colourless crystals, hygroscopic.
Solubility: Very soluble in water, freely soluble in ethanol (96 per cent).
A. Solution S (see Tests) gives the reactions of iodides.
B. Solution S gives the reactions of sodium.
Solution S: Dissolve 10.0 g in carbon dioxide-free water R prepared from distilled water R and dilute to 100 ml with the same solvent.
Appearance of solution: Solution S is clear (2.2.1) and colourless.
Alkalinity: To 12.5 ml of solution S add 0.1 ml of bromothymol blue solution R1. Not more than 0.7 ml of 0.01 M hydrochloric acid is required to change the colour of the indicator.
Iodates: To 10 ml of solution S add 0.25 ml of iodide-free starch solution R and 0.2 ml of dilute sulphuric acid R and allow to stand protected from light for 2 min. No blue colour develops.
Sulphates: Maximum 150 ppm.
Thiosulphates: To 10 ml of solution S add 0.1 ml of starch solution R and 0.1 ml of 0.005 M iodine. A blue colour is produced.
Iron: Maximum 20 ppm.
Dilute 5 ml of solution S to 10 ml with water R.
Heavy metals: Maximum 10 ppm.
Loss on drying: Maximum 3.0 per cent, determined on 1.00 g by drying in an oven at 105 °C for 3 h.
Dissolve 1.300 g in water R and dilute to 100.0 ml with the same solvent. To 20.0 ml of the solution add 40 ml of hydrochloric acid R and titrate with 0.05 M potassium iodate until the colour changes from red to yellow. Add 5 ml of chloroform R and continue the titration, shaking vigorously, until the chloroform layer is decolorised. 1 ml of 0.05 M potassium iodate is equivalent to 14.99 mg of NaI.
Sodium Iodide ACS AR Analytical Reagent Grade Chemical
Formula Wt 149.89
CAS Number 7681-82-5
Assay: Minimum 99.5% NaI
pH of a 5% solution: 6.0-9.0 at 25C
Insoluble matter: 0.01%
Chloride and bromide (as Cl): 0.01%
Iodate (IO3): 3 ppm
Nitrogen compounds (as N): 0.002%
Phosphate (PO4): 0.001%
Sulfate (SO4): 0.005%
Barium (Ba): 0.002%
Heavy metals (as Pb): 5 ppm
Iron (Fe): 5 ppm
Calcium (Ca): 0.002%
Magnesium (Mg): 0.001%
Potassium (K): 0.01%
Taloja Mumbai and Ankleshwar Gujarat, INDIA
Representatives in Houston, Chicago and New York, USA
TEL: (OFF) 91-22-23726950, 23774610, 23723564
Copyright and Usual Disclaimer is Applicable
Last updated 7-aug-17
Exporters to USA, Canada, UAE, Europe, South Africa, Tanzania, Kenya, Egypt, Turkey, Nigeria, Uganda, Brazil, Chile, Argentina, Dubai, Cameroon, Mexico, Brazil, Chile, Argentina, Korea, Thailand, Malaysia, Indonesia, Australia, China, Germany, France, etc.
Representatives in New York, Houston - Texas, Chicago - Illinois, Los Angeles.
Fast Selling IP BP USP ACS FCC Food Grades of Chemicals by Anmol Chemicals
Aluminum Chloride --- Ammonium Chloride --- Ammonium Molybdate --- Benzyl Alcohol --- Bismuth Citrate --- Boric Acid --- Borax; Sodium Borate --- Calcium Butyrate --- Calcium Carbonate --- Calcium Chloride --- Calcium Hydroxide --- Calcium Saccharate --- Carbamide Peroxide --- Carmellose Calcium --- Carmellose Sodium --- Calcium Oxide --- Calcium Sulfate --- Chromic Chloride --- Copper Sulfate --- Cupric Chloride --- Ferric Chloride --- Fumaric Acid ---Magnesium Butyrate --- Magnesium Chloride --- Magnesium Sulfate --- Magnesium Oxide --- Malic Acid --- Maleic Acid --- Manganese Chloride --- Manganese Sulfate --- Propylene Carbonate --- Potassium Bromide --- Potassium Chloride --- Potassium Hydroxide Pellets --- Potassium Alum --- Sodium Acetate --- Sodium Butyrate --- Sodium Molybdate --- Sodium Perborate --- Sodium Hydroxide --- Sodium Sulphate --- Sodium Thiosulfate --- Urea --- Zinc Chloride --- Zinc Sulphate ---
Other Best Selling Products
Ammonium Persulfate --- Ceric Ammonium Nitrate --- Encapsulated Fumaric Acid --- Picric Acid --- Sodium Diacetate
IP BP Ph Eur USP ACS AR Analytical Reagent LR Grades