(FDA) GMP Approved, ISO-9001:2008, ISO-22000:2005 HACCP, FSSAI, "REACH" Pre-registered Kosher & Halal Certified
Polyvinyl Alcohol USP NF BP IP Grade Manufacturers
Anmol Chemicals Group, established in 1976, is the pioneer manufacturer of Specialty chemicals, Pharmaceutical Excipients, Fragrance & Flavor chemicals in India. Anmol Chemicals Group has manufacturing facilities spread across Western India, representatives in Houston Chicago USA and toll manufacturers in China. We also have toll manufacturing units for processing chemicals in a few countries around the world. We make IP, BP, USP, Ph. Eur., FCC or Food Grade, ACS, AR or Analytical Reagent Grade, LR or Laboratory Reagent Grade, Pure and Technical Grades of various chemicals. All our items are analyzed to meet the required standards.
Our manufacturing facility is FDA GMP approved and ISO-9001-2008, ISO 22000-2005 HACCP , FSSAI certified. We are offering products manufactured as per Kosher and Halal approved certified method. We are pre-registered with "Reach" for export to European countries. We can give all solid chemical materials as per specified size or shape.
Polyvinyl Alcohol SDS of Manufacturers
Synonyms: Vinyl alcohol polymer
CAS Number: 9002-89-5, Molecular Weight: poly, Chemical Formula: (C2H4O)x, EINECS EC Number: ----, FEMA: ----,
Poly(vinyl alcohol) or Poly vinyl alcohol BP Grade
Poly(vinyl alcohol) is obtained by polymerisation of vinyl acetate, followed by partial or almost complete hydrolysis of poly(vinyl acetate) in the presence of catalytic amounts of alkali or mineral acids.
Poly(vinyl alcohol) polymers comply with the following indices:
The mean relative molecular mass lies between 20 000 and 150 000. The viscosity is 3 to 70
mPas. The ester value which characterises the degree of hydrolysis is not greater than 280.
Appearance: Yellowish-white powder or translucent granules.
Solubility: Soluble in water, slightly soluble in ethanol, practically insoluble in acetone.
Various grades of poly(vinyl alcohol) are available. They differ in their degree of polymerisation and their degree of hydrolysis which determine the physical properties of the different grades. They are characterised by the viscosity and the ester value of the substance.
A. Infrared absorption spectrophotometry: To pass the test.
Preparation Discs; in some cases, the sample has to be milled, after cooling if necessary, before preparing the discs.
The spectrum obtained shows absorption maxima corresponding to poly(vinyl alcohol) at 2940 cm-1 and 2920 cm-1.
B. It complies with the test for viscosity (see Tests).
Solution S: Heat on a water-bath 250 ml of water R in a borosilicate round-bottomed flask attached to a reflux condenser with stirrer, add 10.0 g of the substance to be examined and continue heating for 30 min with continuous stirring. Remove the flask from the water-bath and continue stirring until room temperature is reached.
Appearance of solution: Solution S is clear and not more intensely coloured than reference solution.
pH: 4.5 to 6.5 for solution S.
Viscosity: 85 per cent to 115 per cent of the value stated on the label.
Determine the viscosity using a falling ball viscometer immediately after preparation of solution S at 20±0.1C.
Acid value: Maximum 3.0.
Ester value: 90 per cent to 110 per cent of the value stated on the label.
Heavy metals: Maximum 10 ppm.
Loss on drying: Maximum 5.0 per cent, determined on 1.000 g by drying in an oven at 105 Â°C for 3 h.
Sulphated ash: Maximum 1.0 per cent, determined on 1.0 g.
The label states:
the viscosity for a 40 g/l solution;
the ester value.
Polyvinyl Alcohol USP Grade
Vinyl alcohol polymer [9002-89-5].
Polyvinyl Alcohol is a water-soluble synthetic resin, represented by the formula: (C2H4O)n in which the average value of n lies between 500 and 5000. It is prepared by 85 percent to 89 percent hydrolysis of polyvinyl acetate. The apparent viscosity, in centipoises, at 20C, of a solution containing 4 g of Polyvinyl Alcohol in each 100 g is not less than 85.0 percent and not more than 115.0 percent of that stated on the label.
pH: between 5.0 and 8.0, in a solution (1 in 25).
Loss on drying: Dry it at 110 to constant weight: it loses not more than 5.0% of its weight.
Residue on ignition: not more than 2.0%.
Water-insoluble substances: 0.1%.
Degree of hydrolysis: to meet the requirement.
Taloja Mumbai and Ankleshwar Gujarat, INDIA
Representatives in Houston, Chicago and New York, USA
TEL: (OFF) 91-22-23726950, 23774610, 23723564
Copyright and Usual Disclaimer is Applicable
Last updated 31-may-17
Exporters to USA, Canada, UAE, Europe, South Africa, Tanzania, Kenya, Egypt, Turkey, Nigeria, Uganda, Brazil, Chile, Argentina, Dubai, Cameroon, Mexico, Brazil, Chile, Argentina, Korea, Thailand, Malaysia, Indonesia, Australia, China, Germany, France, etc.
Representatives in New York, Houston - Texas, Chicago - Illinois, Los Angeles.
Fast Selling IP BP USP ACS FCC Food Grades of Chemicals by Anmol Chemicals
Aluminum Chloride --- Ammonium Chloride --- Ammonium Molybdate --- Benzyl Alcohol --- Bismuth Citrate --- Boric Acid --- Borax; Sodium Borate --- Calcium Butyrate --- Calcium Carbonate --- Calcium Chloride --- Calcium Hydroxide --- Calcium Saccharate --- Carbamide Peroxide --- Carmellose Calcium --- Carmellose Sodium --- Calcium Oxide --- Calcium Sulfate --- Chromic Chloride --- Copper Sulfate --- Cupric Chloride --- Ferric Chloride --- Fumaric Acid ---Magnesium Butyrate --- Magnesium Chloride --- Magnesium Sulfate --- Magnesium Oxide --- Malic Acid --- Maleic Acid --- Manganese Chloride --- Manganese Sulfate --- Propylene Carbonate --- Potassium Bromide --- Potassium Chloride --- Potassium Hydroxide Pellets --- Potassium Alum --- Sodium Acetate --- Sodium Butyrate --- Sodium Molybdate --- Sodium Perborate --- Sodium Hydroxide --- Sodium Sulphate --- Sodium Thiosulfate --- Urea --- Zinc Chloride --- Zinc Sulphate ---
Other Best Selling Products
Ammonium Persulfate --- Ceric Ammonium Nitrate --- Encapsulated Fumaric Acid --- Picric Acid --- Sodium Diacetate
IP BP Ph Eur USP Grades