Anmol  Chemicals

ISO-9001 JK Kosher GMP FSSAI FSSAI ISO 22000-2005
(FDA) GMP Approved, ISO-9001:2008, ISO-22000:2005 HACCP, FSSAI, "REACH" Pre-registered Kosher & Halal Certified

Home ------ Contact

Polysorbate 80 USP NF BP IP ACS FCC Food Grade Manufacturers

Anmol Chemicals Group, established in 1976, is the pioneer manufacturer of Specialty chemicals, Pharmaceutical Excipients, Fragrance & Flavor chemicals in India. Anmol Chemicals Group has manufacturing facilities spread across Western India, representatives in Houston Chicago USA and toll manufacturers in China. We also have toll manufacturing units for processing chemicals in a few countries around the world. We make IP, BP, USP, Ph. Eur., FCC or Food Grade, ACS, AR or Analytical Reagent Grade, LR or Laboratory Reagent Grade, Pure and Technical Grades of various chemicals. All our items are analyzed to meet the required standards.

Our manufacturing facility is FDA GMP approved and ISO-9001-2008, ISO 22000-2005 HACCP , FSSAI certified. We are offering products manufactured as per Kosher and Halal approved certified method. We are pre-registered with "Reach" for export to European countries. We can give all solid chemical materials as per specified size or shape.

Exporter Importer by Sea Exports by Air Chemical Exporter. Palletized for Export. Liquid Products HDPE Drum Packing of Chemicals Bulk Export Packing Jumbo Bag Packing

Polysorbate 80 SDS of Manufacturers

Polysorbate 80

Synonyms: Polyoxyethylene 20 Sorbitan Mono-oleate
CAS Number: 9005-65-6, Molecular Weight: 2917, Chemical Formula: C64H124O26, EINECS EC Number: 500-019-9, FEMA: 2917,

Polysorbate 80 BP Grade
Polyoxyethylene 20 Sorbitan Mono-oleate
Ph Eur

Action and use: Non-ionic surfactants.

DEFINITION
Mixture of partial esters of fatty acids, mainly Oleic acid (0799), with sorbitol and its anhydrides ethoxylated with approximately 20 moles of ethylene oxide for each mole of sorbitol and sorbitol anhydrides.

CHARACTERS
Appearance: Oily, yellowish or brownish-yellow, clear or slightly opalescent liquid.
Solubility: Dispersible in water, in anhydrous ethanol, in ethyl acetate and in methanol, practically insoluble in fatty oils and in liquid paraffin.
Relative density: About 1.10.
Viscosity: About 400 mPa·s at 25C.

IDENTIFICATION
First identification A, D.
Second identification B, C, D, E.
A. Infrared absorption spectrophotometry.
B. Hydroxyl value (see Tests).
C. Saponification value (see Tests).
D. Composition of fatty acids.
E. Dissolve 0.1 g in 5 ml of methylene chloride R. Add 0.1 g of potassium thiocyanate R and 0.1 g of cobalt nitrate R. Stir with a glass rod. The solution becomes blue.

TESTS
Acid value: Maximum 2.0.
Hydroxyl value: 65 to 80.
Peroxide value: Maximum 10.0.
Saponification value: 45 to 55, determined on 4.0 g.
Composition of fatty acids: To pass the test.
Ethylene oxide and dioxan: Maximum 1 ppm of ethylene oxide and maximum 10 ppm of dioxan.
Heavy metals: Maximum 10 ppm.
Water: Maximum 3.0 per cent, determined on 1.00 g.
Total ash: Maximum 0.25 per cent, determined on 2.0 g.


Polysorbate 80 USP NF Grade
Sorbitan, mono-9-octadecenoate, poly(oxy-1,2-ethanediyl) derivs., (Z)-.
Polyoxyethylene 20 sorbitan monooleate [9005-65-6].
Polysorbate 80 is an oleate ester of sorbitol and its anhydrides copolymerized with approximately 20 moles of ethylene oxide for each mole of sorbitol and sorbitol anhydrides.
Identification—
A: To 5 mL of a solution (1 in 20) add 5 mL of sodium hydroxide. Boil for a few minutes, cool, and acidify with 3 N hydrochloric acid: the solution is strongly opalescent.
B: To 2 mL of a solution (1 in 20) add 0.5 mL of bromine dropwise: the bromine is decolorized.
C: A mixture of 60 volumes of it and 40 volumes of water yields a gelatinous mass at normal and lower than normal room temperatures.
Specific gravity: between 1.06 and 1.09.
Viscosity: between 300 and 500 centistokes when determined at 25C.
Acid value: Weigh 10.0 g into a wide-mouth, 250-mL conical flask, and add 50 mL of neutralized alcohol. Heat on a steam bath nearly to boiling, shaking thoroughly occasionally while heating. Invert a beaker over the mouth of the flask, cool under running water, add 5 drops of phenolphthalein and titrate with 0.1 N sodium hydroxide: not more than 4 mL of 0.100 N sodium hydroxide is required, corresponding to an acid value of 2.2.
Hydroxyl value: between 65 and 80.
Saponification value: between 45 and 55.
Water: not more than 3.0%.
Residue on ignition: not more than 0.25%.
Heavy metals: 0.001%.


Polysorbate 80 FCC Food Grade
Polyoxyethylene (20) Sorbitan Monooleate; Sorbitan Mono-
9-octadecenoate; Poly(oxy-1,2-ethanediyl) Derivative
INS: 433 CAS: [9005-65-6]

DESCRIPTION
Polysorbate 80 occurs as a yellow to orange colored, oily liquid. It is a mixture of oleate partial esters of sorbitol and sorbitol anhydrides condensed with approximately 20 moles of ethylene oxide (C2H4O) for each mole of sorbitol and its mono- and dianhydrides. It is very soluble in water, producing a nearly colorless solution, and it is soluble in alcohol, in fixed oils, in ethyl acetate, and in toluene. It is insoluble in mineral oil.
Function: Emulsifier; stabilizer.

REQUIREMENTS
Identification
A. Add 5 mL of 1 N sodium hydroxide to 5 mL of a 1:20 aqueous solution, boil for a few minutes, cool, and acidify with 2.7 N hydrochloric acid. The solution is strongly opalescent.
B. Add bromine dropwise, to a 1:20 aqueous solution. The bromine is decolorized.
C. A 60:40 (v/v) mixture of Polysorbate 80:water at 25C or below yields a gelatinous mass.

Assay for Oxyethylene Content: Not less than 65.0% and not more than 69.5% of oxyethylene groups (—C2H4O—), equivalent to between 96.5% and 103.5% of Polysorbate 80, calculated on the anhydrous basis.
Acid Value: Not more than 2.
1,4-Dioxane: Not more than 10 mg/kg.
Hydroxyl Value: Between 65 and 80.
Lead: Not more than 2 mg/kg.
Oleic Acid: Between 22 and 24 g per 100 g of sample.
Residue on Ignition: Not more than 0.25%.
Saponification Value: Between 45 and 55.
Water: Not more than 3.0%.

Logo

Manufacturers

ANMOL CHEMICALS
Taloja Mumbai and Ankleshwar Gujarat, INDIA
Representatives in Houston, Chicago and New York, USA
TEL: (OFF) 91-22-23726950, 23774610, 23723564

e-mail: info@anmol.org

Copyright and Usual Disclaimer is Applicable
Last updated 31-may-17

Calcium Chloride in Jumbo Bags Drum Packing Paletized and Shrink Wrapped Packing for Exports to USA UAE Africa Tanzania Turkey Kenya Dubai

Exporters to USA, Canada, UAE, Europe, South Africa, Tanzania, Kenya, Egypt, Turkey, Nigeria, Uganda, Brazil, Chile, Argentina, Dubai, Cameroon, Mexico, Brazil, Chile, Argentina, Korea, Thailand, Malaysia, Indonesia, Australia, China, Germany, France, etc.

Representatives in New York, Houston - Texas, Chicago - Illinois, Los Angeles.

Fast Selling IP BP USP ACS FCC Food Grades of Chemicals by Anmol Chemicals
Aluminum Chloride --- Ammonium Chloride --- Ammonium Molybdate --- Benzyl Alcohol --- Bismuth Citrate --- Boric Acid --- Borax; Sodium Borate --- Calcium Butyrate --- Calcium Carbonate --- Calcium Chloride --- Calcium Hydroxide --- Calcium Saccharate --- Carbamide Peroxide --- Carmellose Calcium --- Carmellose Sodium --- Calcium Oxide --- Calcium Sulfate --- Chromic Chloride --- Copper Sulfate --- Cupric Chloride --- Ferric Chloride --- Fumaric Acid ---Magnesium Butyrate --- Magnesium Chloride --- Magnesium Sulfate --- Magnesium Oxide --- Malic Acid --- Maleic Acid --- Manganese Chloride --- Manganese Sulfate --- Propylene Carbonate --- Potassium Bromide --- Potassium Chloride --- Potassium Hydroxide Pellets --- Potassium Alum --- Sodium Acetate --- Sodium Butyrate --- Sodium Molybdate --- Sodium Perborate --- Sodium Hydroxide --- Sodium Sulphate --- Sodium Thiosulfate --- Urea --- Zinc Chloride --- Zinc Sulphate ---
Other Best Selling Products
Ammonium Persulfate --- Ceric Ammonium Nitrate --- Encapsulated Fumaric Acid --- Picric Acid --- Sodium Diacetate

Polysorbate 80
IP BP Ph Eur USP FCC Food Grades
Polysorbate 80