Anmol India Chemicals India

ISO-9001 JK Kosher GMP HACCP FSSAI FSSC 22000 FSSAI ISO14001 OHSAS 18001 Allergen free Gluten free
(FDA) GMP Approved, ISO-9001:2008, ISO-14001, ISO OHSAS-18001, HACCP, FSSC 220000, FSSAI, "REACH" Pre-registered Kosher & Halal Certified

Search for the supplies that you need here:

Home ------ Contact

Phosphoric Acid SDS MSDS of Manufacturers

Anmol Chemicals Group, established in 1976, is the pioneer manufacturer of Specialty chemicals, Pharmaceutical Excipients, Fragrance & Flavor chemicals in India. Anmol Chemicals Group has manufacturing facilities spread across Western India, representatives in Houston Chicago USA and toll manufacturers in China. We also have toll manufacturing units for processing chemicals in a few countries around the world. We make IP, BP, USP, Ph. Eur., FCC or Food Grade, ACS, AR or Analytical Reagent Grade, LR or Laboratory Reagent Grade, Pure and Technical Grades of various chemicals. All our items are analyzed to meet the required standards.

Our manufacturing facility is FDA approved and GMP, ISO-9001-2008, ISO-14001, ISO OHSAS 18000, ISO 22000-2005 HACCP, FSSAI, FSSC-22000, certified. We are offering products manufactured as per Kosher and Halal approved certified method. We are pre-registered with "Reach" for export to European countries. We can give all solid chemical materials as per specified size or shape.

Exporter Importer by Sea Exports by Air Chemical Exporter. Palletized for Export. Liquid Products HDPE Drum Packing of Chemicals Bulk Export Packing Jumbo Bag Packing

Phosphoric Acid Specifications of Manufacturers

Phosphoric Acid Manufacturers

Phosphoric Acid SDS MSDS Sheet, Material Safety Data Sheet

Section 1: Product Identification

Synonyms: Phosphoric Acid
CAS No.: 7664-38-2
EINECS EC Number: 231-633-2
Molecular Weight: 98
Chemical Formula: H3PO4
Relevant identified uses: Laboratory chemicals, Manufacture of substances. For Industrial use.

Section 2: Hazard Identification

GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008

Corrosive to Metals Category 1
Skin corrosion/irritation Category 1A, B, C

Labeling according Regulation (EC) No 1272/2008

GHS Label Elements
Corrosive
Corrosive

Signal Words: Danger

Hazard statements:
H290: May be corrosive to metals
H314: Causes severe skin burns and eye damage

Precautionary statements:
P234: Keep only in original container.
P260: Do not breathe dust/fume/gas/mist/vapors/spray.
P264: Wash … thoroughly after handling.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P312: Call a POISON CENTER or doctor/physician if you feel unwell.
P362: Take off contaminated clothing and wash before reuse.
P303+361+353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
P305+351+338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do – continue rinsing.
P501: Dispose of contents/container to authorized agents only.

Classification according to EU Directives 67/548/EEC or 1999/45/EC:
C Corrosive
R35 Causes severe burns.

Section 3: Composition / Information on Ingredients

Ingredient: Phosphoric Acid
CAS No.: 7664-38-2
EINECS EC Number: 231-633-2

Section 4: First Aid Measures

Always seek medical attention after first aid measures are provided.

Eye Contact: Check for and remove any contact lenses. In case of contact, immediately flush eye with plenty of water for at least 15 minutes. Cold water may be used. Get medical attention immediately.
Skin Contact: Immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Call a physician, immediately. Wash clothing before reuse..
Ingestion: If swallowed, do not induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to and unconscious person. Loosen tight clothing such as a collar, tie, belt or waistband. Get medical attention immediately.
Medical Conditions generally Aggravated by Exposure: Repeated exposure of the eyes to a low level of Sodium hydroxide dust can produce eye irritation. Repeated skin exposure can produce local skin destruction, or dermatitis. Repeated inhalation of dust can produce varying degree of respiratory irritation or lung damage.

Section 5: Fire Fighting Measures

Flash Point: NA
Fire Extinguishing Media: Adapt extinguishing media to the environment. Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special Fire Fighting Procedures: Wear self contained breathing apparatus for firefighting if necessary.
Unusual Fire and Explosion Hazards: Flammable hydrogen gas may be produced on prolong contact with metals such as aluminum, tin lead and zinc.

Section 6: Accidental Release Measures

Steps to be Taken in Case Material is Released or Spilled: Evacuate the area of all unnecessary personnel. Wear suitable protective equipment. Eliminate any ignition sources until the area is determined to be free from explosion or fire hazards. Contain the release and eliminate its source, if this can be done without risk. Take up and containerize for proper disposal.  Comply with local, state and Federal regulations on reporting releases. Refer to regulatory information for reportable quantity and other regulatory data.
Methods for cleaning up: Take up liquid spill into absorbent material, e.g.: dry sand/earth or powdered limestone. Scoop absorbed substance into closing containers. Carefully collect the spill/leftovers. Small quantities of liquid spill may be neutralize with acid solution. Wash away neutralized product with plentiful water. Clean contaminated surfaces with an excess of water. Take collected spill to manufacturer/competent authority. Wash clothing and equipment after handling.
Waste Disposal Methods: Dispose of waste according to Federal, State and Local Regulations.

Section 7: Handling and Storage

Keep in a tightly closed original container. Protect from physical damage. Store in a cool, dry, ventilated area away from sources of heat, moisture and incompatibilities. Containers may be hazardous when empty since they retain product residues; observe all warnings and precautions listed for the product.

Section 8: Exposure Controls / Personal Protection

Components with workplace control parameters
USA ACGIH TWA: 1 mg/m³
USA OSHA
: 1 mg/m³ OSHA PEL (TWA) (mg/m³)
Engineering Controls Ventilation required:  It should be handled or transferred in an approved fume hood or with adequate ventilation.
Personal Protection Equipment
Respiratory protection: If workplace exposure limit (s) of product or any component is exceeded (see TLV/PEL), a NIOSH/MSHA approved air supplied respirator is advised in absence of proper environmental control. OSHA regulations also permit other NIOSH/MSHA respirator (negative pressure type) under specified conditions (see your safety equipment supplier). Engineering and/or administrative controls should be implemented to reduce exposure.
Protective gloves: Nitrile or equivalent.
Skin protection: Impervious, protective clothing.
Eye protection: Safety glasses with side shields must be worn at all times.
Additional clothing and/or equipment: Eyewash and safety equipment should be readily available.
Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at the end of workday.

Section 9 Physical and Chemical Properties

Appearance and Physical State: Phosphoric Acid 85% a clear colorless is liquid.
Odor (threshold): Odorless.
Specific Gravity (H2O=1): 1.6 to 1.7
Vapor Pressure (mm Hg): 1 - 4 mm Hg at 15.5C (60F)
Vapor Density (air=1): NA
Melting Point: 21C
Boiling Point: 158C
pH: 1-1.5 at 50gm/liter
Solubility in Water: Soluble

Section 10: Stability and Reactivity

Stability: It is stable under ordinary conditions of use and storage.
Reactivity: Exothermic reaction with water. Reacts with metals to release hydrogen.
Materials to Avoid (Incompatibility): Strong bases, Powdered metals.
Hazardous Decomposition Products: Thermal decomposition may produce toxic fumes of phosphorus oxides and/or phosphine.
Hazardous Polymerization: Will not occur.

Section 11: Toxicological Information

Results of component toxicity test:
LD50 (rat): 1,530 mg/kg (anhydrous) (IUCLID)
LD50 (rabbit): 2,740 mg/kg (anhydrous)(IUCLID)
Carcinogenicity: This product is not classifiable as to its carcinogenicity based on its IARC, ACGIH, NTP, or EPA classification.
Symptoms of overexposure: Coughing. Dry/sore throat. Irritation of the respiratory tract. Irritation of the nasal mucous membranes. FOLLOWING SYMPTOMS MAY APPEAR LATER: Respiratory difficulties. Risk of lung oedema. Burns to the gastric/intestinal mucosa. Nausea. Abdominal pain. Blood in vomit. AFTER ABSORPTION OF HIGH QUANTITIES: Shock.

Section 12: Ecological Information

Toxicity to fish:
LC50 fishes 1: 138 mg/l (96 h; Pisces; Pure substance)
LC50 fish 2: 100 - 1000 mg/l (Pisces; Pure substance)
LC50 other aquatic organisms 1: 100 - 1000 mg/l (96 h; Protozoa; Pure substance)
The product may affect the acidity (pH-factor) in water with risk of harmful effects to aquatic organisms.
Results of PBT and vPvB assessment: This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.

Section 13 Disposal Considerations

State and local laws governing disposal of materials can differ. Ensure proper disposal compliance with proper authorities before disposal.

Section 14: Transportation Information

USA DOT & ADR/RID:
Proper shipping name: Phosphoric acid solution
Hazard Class: 8
Packaging group: III
UN Number: UN1805
IATA:
Proper shipping name: Phosphoric acid solution
Hazard Class: 8
Packaging group: III
UN Number: UN1805
IMO:
Proper shipping name: Phosphoric acid solution
Hazard Class: 8
Packaging group: III
UN Number: UN1805

Section 15: Regulatory Information

USA:
SARA Section 311/312 Hazard Classes: Immediate (acute) health hazard
SARA 302 Extremely Hazardous Substance: None present or none present in regulated quantities.
SARA 313 (TRI Reporting): None present or none present in regulated quantities.
TSCA 8(b) inventory: Listed
California Proposition 65: None.

Section 16: Other Information

DISCLAIMER: The information and recommendations set forth herein (hereinafter "Information") are presented in good faith and believed correct as of the date hereof. It is compiled from various sources and it is not necessarily all inclusive nor fully adequate in every circumstance. In addition, these suggestions should not be confused with nor followed in violation of applicable laws, regulations, rules or insurance requirements applicable. This MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose.

Logo

Manufacturers

ANMOL CHEMICALS
Taloja Mumbai and Ankleshwar Gujarat, INDIA
Representatives in Houston, Chicago and New York, USA
TEL: (OFF) 91-22-23726950, 23774610, 23723564

e-mail: info@anmol.org

Copyright and Usual Disclaimer is Applicable
Last updated 29-jun-18

Calcium Chloride in Jumbo Bags Drum Packing Paletized and Shrink Wrapped Packing for Exports to USA UAE Africa Tanzania Turkey Kenya Dubai

Exporters to USA, Canada, UAE, Europe, South Africa, Tanzania, Kenya, Egypt, Turkey, Nigeria, Uganda, Brazil, Chile, Argentina, Dubai, Cameroon, Mexico, Brazil, Chile, Argentina, Korea, Thailand, Malaysia, Indonesia, Australia, China, Germany, France, etc.

Representatives in New York, Houston - Texas, Chicago - Illinois, Los Angeles.

Fast Selling IP BP USP ACS FCC Food Grades of Chemicals by Anmol Chemicals
Acetic Acid Glacial --- Aluminum Chloride --- Ammonium bicarbonate --- Ammonium Carbonate --- Ammonium Chloride --- Benzoic Acid --- Benzyl Alcohol --- Boric Acid --- Borax; Sodium Borate --- Calcium Butyrate --- Calcium Carbonate --- Calcium Chloride --- Calcium Hydroxide --- Calcium Saccharate --- Carbamide Peroxide --- Calcium Oxide --- Calcium Sulfate --- Chromic Chloride --- Copper Sulfate --- Cupric Chloride --- Ferric Chloride --- Fumaric Acid --- Magnesium Butyrate --- Magnesium Chloride --- Magnesium Sulfate --- Malic Acid --- Maleic Acid --- Manganese Chloride --- Manganese Sulfate --- Octyldodecanol --- Oleic acid --- Phenylethyl Alcohol --- Propylene Carbonate --- Potassium Bromide --- Potassium Bicarbonate --- Potassium Carbonate --- Potassium Chloride --- Potassium Hydroxide Pellets --- Potassium Acetate --- Potassium Alum --- Potassium Iodate --- Potassium Iodide --- Selenious Acid --- Sodium Acetate --- Sodium Butyrate --- Sodium Bicarbonate --- Sodium Chloride --- Sodium Molybdate --- Sodium Selenite --- Sodium Perborate --- Sodium Hydroxide --- Sodium Sulphate --- Sodium Sulfide --- Sodium Thiosulfate --- Urea --- Zinc Chloride --- Zinc Sulphate ---
Other Best Selling Products
Ammonium Persulfate --- Butylated Hydroxyanisole --- Butylated Hydroxytoluene --- Encapsulated Fumaric Acid --- Sodium Bromate --- Sodium Diacetate --- TBHQ