cGMP, GLP - FDA Approved, ISO 9001, ISO 14001, ISO 17025, ISO 45001, HACCP, FSSC 22000, FSSAI, "REACH" Registered, Kosher & Halal Certified. We observe WHO Good Manufacturing Practice GMP and Good Laboratory Practice GLP.
Search for the supplies that you need here:
Magnesium Pidolate BP IP Grade Manufacturers
Anmol Chemicals Group, established in 1976, is the pioneer manufacturer of Specialty chemicals, Pharmaceutical Excipients, Fragrance & Flavor chemicals in India. Anmol Chemicals Group has manufacturing facilities spread across Western India, representatives in Houston Chicago USA, Dubai and UAE. We also have toll manufacturing units for processing chemicals in a few countries around the world. We make IP, BP, USP, Ph. Eur., FCC or Food Grade, Analytical Reagent Grade, LR or Laboratory Reagent Grade, Pure and Technical Grades of various chemicals. All our items are analyzed to meet the required standards. We can supply the material in grams for your laboratory trial and in tons for your plant scale jobs.
Our manufacturing facility is FDA approved and cGMP, GLP (FDA) Approved, ISO 9001, ISO 14001, ISO 17025, ISO 45001, ISO 22000, HACCP, FSSAI, FSSC 22000, Halal and Kosher certified. We are registered with "REACH" for export to European countries. Solid materials can be customized for particle size, shape and bulk density. We observe WHO Good Manufacturing Practice and Good Laboratory Practice. We are a STAR Export House and “Authorised Economic Operator” as per Indian customs.
Magnesium Pidolate SDS of Manufacturers
Synonyms: Magnesium salt of pidolic acid, Pyroglutamic acid
CAS Number: 62003-27-4, Molecular Weight: 280.5, Chemical Formula: C10H12N2O6Mg, EINECS EC Number: 263-365-7, FEMA: ----,
Magnesium Pidolate BP Grade
C10H12N2O6Mg -- 280.5 -- 62003-27-4
Content: 8.49 per cent to 8.84 per cent of Mg (Ar = 24.31) (anhydrous substance).
Appearance: Amorphous, white or almost white powder, hygroscopic.
Solubility: Very soluble in water, soluble in methanol, practically insoluble in methylene chloride.
A. Thin-layer chromatography.
Test solution: Dissolve 60 mg in 2 ml of water and dilute to 10 ml with methanol.
Reference solution: Dissolve 55 mg of pidolic acid CRS in 2 ml of water and dilute to 10 ml with methanol.
Plate:TLC silica gel plate.
Mobile phase: methanol, glacial acetic acid, methylene chloride (15:20:65 V/V/V).
Development: Over 2/3 of the plate.
Drying: At 100-105C for 15 min.
Detection: Spray with concentrated sodium hypochlorite solution. Allow to stand for 10 min and spray abundantly with glacial acetic acid. Allow to stand again for 10 min and dry the plate at 100-105C for 2 min. Spray with potassium iodide and starch solution until spots appear.
Results: The principal spot in the chromatogram obtained with the test solution is similar in position, colour and size to the principal spot in the chromatogram obtained with the reference solution. The chromatogram obtained with the test solution may show 2 faint secondary spots.
B. To 0.15 ml of solution S (see Tests) add 1.8 ml of water. The solution gives the reaction of magnesium.
Solution S: Dissolve 5.00 g in carbon dioxide-free water prepared from distilled water and dilute to 50.0 ml with the same solvent.
Appearance of solution: Solution S is clear and not more intensely coloured than reference solution.
pH: 5.5 to 7.0 for solution S.
Specific optical rotation: - 23.3 to - 26.5 (anhydrous substance), determined on solution S.
Test solution: Dissolve 0.500 g of the substance to be examined in the mobile phase and dilute to 100.0 ml with the mobile phase.
Reference solution (a): Dilute 1.0 ml of the test solution to 100.0 ml with the mobile phase.
Reference solution (b): Dissolve 50.0 mg pidolate impurity B CRS in the mobile phase and dilute to 100.0 ml with the mobile phase. Dilute 5.0 ml of the solution to 50.0 ml with the mobile phase.
Reference solution (c): Dilute 10.0 ml of reference solution (b) to 100.0 ml with the mobile phase.
Reference solution (d): Dilute 1.0 ml of nitrate standard solution (100 ppm NO3) to 100.0 ml with the mobile phase.
Reference solution (e): Dilute 6.0 ml of reference solution (a) to 10.0 ml with reference solution (b).
size: = 0.25 m, Dia = 4.6 mm;
stationary phase: octadecylsilyl silica gel for chromatography (5 Î¼m).
Mobile phase: Dissolve 1.56 g of sodium dihydrogen phosphate R in 1000 ml of water R and adjust to pH 2.5 with a 10 per cent V/V solution of phosphoric acid R.
Flow rate: 1.5 ml/min.
Detection: Spectrophotometer at 210 nm.
Injection: 10 Î¼l loop injector; inject the test solution and reference solutions (b), (c), (d) and (e).
Run time: 4 times the retention time of pidolic acid.
Retention times: Pidolic acid = about 4.5 min; impurity B = about 7.5 min.
System suitability: Reference solution (e):resolution: minimum 10 between the peaks due to pidolic acid and to impurity B.
impurity B: not more than the area of the principal peak in the chromatogram obtained with reference solution (b) (1.0 per cent);
total of other impurities: not more than half of the area of the principal peak in the chromatogram obtained with reference solution (b) (0.5 per cent);
disregard limit: not more than 0.5 times the area of the principal peak in the chromatogram obtained with reference solution (c) (0.05 per cent); disregard any peak corresponding to the nitrate ion (NO3-).
Test solution: Dissolve 0.250 g of the substance to be examined in 4 ml of water and dilute to 50.0 ml with methanol.
Reference solution (a): Dissolve 60.0 mg of glutamic acid R in 50 ml of water R and dilute to 100.0 ml with methanol. Dilute 1.0 ml of the solution to 20.0 ml with methanol.
Reference solution (b): Dissolve 10 mg of glutamic acid and 10 mg of aspartic acid in water and dilute to 25 ml with the same solvent. Dilute 1 ml of the solution to 10 ml with water.
Plate:TLC silica gel plate R.
Mobile phase: glacial acetic acid, water, butanol (20:20:60 V/V/V).
Application: 5 Î¼l.
Development: Over 2/3 of the plate.
Drying: In air.
Detection: Spray with ninhydrin solution and heat at 100-105C for 15 min.
System suitability: The test is not valid unless the chromatogram obtained with reference solution (b) shows 2 clearly separated spots.
impurity A: any spot corresponding to impurity A in the chromatogram obtained with the test solution is not more intense that the spot in the chromatogram obtained with reference solution (a) (0.6 per cent).
Chlorides: Maximum 500 ppm.
Nitrates: Examine the chromatogram obtained with the test solution in the test for related substances.
nitrates: not more than the area of the principal peak in the chromatogram obtained with reference solution (d) (200 ppm).
Sulphates: Maximum 0.1 per cent.
Arsenic: Maximum 2 ppm.
Iron: Maximum 200 ppm.
Heavy metals: Maximum 20 ppm.
Water: Maximum 8.0 per cent, determined on 0.200 g.
Dissolve 0.300 g in 50 ml of water. Carry out the complexometric titration of magnesium.
1 ml of 0.1 M sodium EDTA is equivalent to 2.431 mg of Mg.
A. glutamic acid,
B. (2S)-2-[[[(2S)-5-oxopyrrolidin-2-yl]carbonyl]amino]pentanedioic acid.
Taloja Mumbai and Ankleshwar, INDIA
Representatives in Houston, Chicago and New York, USA
TEL: (OFF) +91 22 23726950, +91 22 23774610, +91 22 23723564
Copyright and Usual Disclaimer is Applicable
Last updated 1-apr-21
Exporters to USA, Canada, UAE, Europe, South Africa, Tanzania, Kenya, Egypt, Turkey, Nigeria, Uganda, Brazil, Chile, Argentina, Dubai, Cameroon, Mexico, Brazil, Chile, Argentina, Korea, Thailand, Malaysia, Indonesia, Australia, China, Germany, France, etc.
Representatives in New York, Houston - Texas, Chicago - Illinois, Los Angeles.
Fast Selling IP BP Ph Eur EP USP Analytical Reagent FCC Food Grades of Chemicals by Anmol Chemicals
Acetic Acid Glacial --- Aluminum Chloride --- Ammonium bicarbonate --- Ammonium Carbonate --- Ammonium Chloride --- Benzoic Acid --- Benzyl Alcohol --- Boric Acid --- Borax; Sodium Borate --- Calcium Butyrate --- Calcium Carbonate --- Calcium Chloride --- Calcium Hydroxide --- Calcium Saccharate --- Carbamide Peroxide --- Calcium Oxide --- Calcium Sulfate --- Chromic Chloride --- Copper Sulfate --- Cupric Chloride --- Ferric Chloride --- Fumaric Acid --- Magnesium Butyrate --- Magnesium Chloride --- Magnesium Sulfate --- Malic Acid --- Maleic Acid --- Manganese Chloride --- Manganese Sulfate --- Octyldodecanol --- Oleic acid --- Phenylethyl Alcohol --- Propylene Carbonate --- Potassium Bromide --- Potassium Bicarbonate --- Potassium Carbonate --- Potassium Chloride --- Potassium Hydroxide Pellets --- Potassium Alum --- Selenious Acid --- Sodium Acetate --- Sodium Butyrate --- Sodium Bicarbonate --- Sodium Chloride --- Sodium Molybdate --- Sodium Selenite --- Sodium Perborate --- Sodium Hydroxide --- Sodium Sulphate --- Sodium Sulfide --- Sodium Thiosulfate --- Urea --- Zinc Chloride --- Zinc Sulphate ---
Other Best Selling Products
Ammonium Persulfate --- Butylated Hydroxyanisole --- Butylated Hydroxytoluene --- Sodium Bromate --- Sodium Diacetate -
IP BP Grades Manufacturers