Anmol  Chemicals

ISO-9001 JK Kosher GMP FSSAI FSSAI ISO 22000-2005
(FDA) GMP Approved, ISO-9001:2008, ISO-22000:2005 HACCP, FSSAI, "REACH" Pre-registered Kosher & Halal Certified

Home ------ Contact

Carmellose Sodium BP IP Manufacturers

Anmol Chemicals Group, established in 1976, is the pioneer manufacturer of Specialty chemicals, Pharmaceutical Excipients, Fragrance & Flavor chemicals in India. Anmol Chemicals Group has manufacturing facilities spread across Western India, representatives in Houston Chicago USA and toll manufacturers in China. We also have toll manufacturing units for processing chemicals in a few countries around the world. We make IP, BP, USP, Ph. Eur., FCC or Food Grade, ACS, AR or Analytical Reagent Grade, LR or Laboratory Reagent Grade, Pure and Technical Grades of various chemicals. All our items are analyzed to meet the required standards.

Our manufacturing facility is FDA GMP approved and ISO-9001-2008, ISO 22000-2005 HACCP , FSSAI certified. We are offering products manufactured as per Kosher and Halal approved certified method. We are pre-registered with "Reach" for export to European countries. We can give all solid chemical materials as per specified size or shape.

Exporter Importer by Sea Exports by Air Chemical Exporter. Palletized for Export. Liquid Products HDPE Drum Packing of Chemicals Bulk Export Packing Jumbo Bag Packing

Carmellose Sodium SDS of Manufacturers

Carmellose Sodium

Synonyms: sodium salt of a partly Ocarboxymethylated
CAS Number: 9004-32-4, Molecular Weight: ----, Chemical Formula: ----, EINECS EC Number: ----, FEMA: ----,

Carmellose Sodium BP Grade
Ph Eur
9004-32-4
Action and use: Excipient; bulk laxative.
Preparation: Carmellose Sodium Eye Drops

DEFINITION
Carmellose sodium (carboxymethylcellulose sodium) is the sodium salt of a partly Ocarboxymethylated cellulose. It contains not less than 6.5 per cent and not more than 10.8 per cent of sodium (Na), calculated with reference to the dried substance.

CHARACTERS
A white or almost white, granular powder, hygroscopic after drying, practically insoluble in acetone, in ethanol and in toluene. It is easily dispersed in water giving colloidal solutions.

IDENTIFICATION
A. To 10 ml of solution S (see Tests) add 1 ml of copper sulphate solution. A blue, cotton-like precipitate is formed.
B. Boil 5 ml of solution S for a few minutes. No precipitate is formed.
C. The solution prepared from the sulphated ash in the test for heavy metals gives the reactions of sodium.

TESTS
Solution S: Sprinkle a quantity of the substance to be examined equivalent to 1.0 g of the dried substance onto 90 ml of carbon dioxide-free water at 40C to 50C stirring vigorously. Continue stirring until a colloidal solution is obtained, cool and dilute to 100 ml with carbon dioxide-free water.
Appearance of solution: Solution S is not more opalescent than reference suspension and not more intensely coloured than reference solution.
pH: The pH of solution S is 6.0 to 8.0.
Apparent viscosity: While stirring, introduce a quantity of the substance to be examined equivalent to 2.00 g of the dried substance into 50 ml of water heated to 90C. For a product of low viscosity, use if necessary, the quantity required to give the concentration indicated on the label. Allow to cool, dilute to 100.0 ml with water and stir until dissolution is complete. Determine the viscosity using a rotating viscometer at 20C and a shear rate of 10s- 1. If it is impossible to obtain a shear rate of exactly 10s- 1, use a shear rate slightly higher and a rate slightly lower and interpolate. The apparent viscosity is not less than 75 per cent and not more than 140 per cent of the value stated on the label.
Sodium glycollate: To pass the test: (0.4 per cent)
Chlorides: Dilute 2 ml of solution S to 15 ml with water R . The solution complies with the limit test for chlorides (0.25 per cent).
Heavy metals: To the residue obtained in the determination of the sulphated ash, add 1 ml of hydrochloric acid and evaporate on a water-bath. Take up the residue in 20 ml of water. 12 ml of the solution complies with limit test A for heavy metals (20 ppm).
Loss on drying: Not more than 10.0 per cent, determined on 1.000 g by drying in an oven at 105C.
Sulphated ash: 20.0 per cent to 33.3 per cent, determined on 1.0 g using a mixture of equal volumes of sulphuric acid and water and calculated with reference to the dried substance. These limits correspond to a content of 6.5 per cent to 10.8 per cent of sodium (Na).

LABELLING
The label states the apparent viscosity in millipascal seconds for a 20 g/l solution; for a product of low viscosity, the label states the concentration of the solution to be used and the apparent viscosity in millipascal seconds.

Logo

Manufacturers

ANMOL CHEMICALS
Taloja Mumbai and Ankleshwar Gujarat, INDIA
Representatives in Houston, Chicago and New York, USA
TEL: (OFF) 91-22-23726950, 23774610, 23723564

e-mail: info@anmol.org

Copyright and Usual Disclaimer is Applicable
Last updated 30-may-17

Calcium Chloride in Jumbo Bags Drum Packing Paletized and Shrink Wrapped Packing for Exports to USA UAE Africa Tanzania Turkey Kenya Dubai

Exporters to USA, Canada, UAE, Europe, South Africa, Tanzania, Kenya, Egypt, Turkey, Nigeria, Uganda, Brazil, Chile, Argentina, Dubai, Cameroon, Mexico, Brazil, Chile, Argentina, Korea, Thailand, Malaysia, Indonesia, Australia, China, Germany, France, etc.

Representatives in New York, Houston - Texas, Chicago - Illinois, Los Angeles.

Fast Selling IP BP USP ACS FCC Food Grades of Chemicals by Anmol Chemicals
Aluminum Chloride --- Ammonium Chloride --- Ammonium Molybdate --- Benzyl Alcohol --- Bismuth Citrate --- Boric Acid --- Borax; Sodium Borate --- Calcium Butyrate --- Calcium Carbonate --- Calcium Chloride --- Calcium Hydroxide --- Calcium Saccharate --- Carbamide Peroxide --- Carmellose Calcium --- Carmellose Sodium --- Calcium Oxide --- Calcium Sulfate --- Chromic Chloride --- Copper Sulfate --- Cupric Chloride --- Ferric Chloride --- Fumaric Acid ---Magnesium Butyrate --- Magnesium Chloride --- Magnesium Sulfate --- Magnesium Oxide --- Malic Acid --- Maleic Acid --- Manganese Chloride --- Manganese Sulfate --- Propylene Carbonate --- Potassium Bromide --- Potassium Chloride --- Potassium Hydroxide Pellets --- Potassium Alum --- Sodium Acetate --- Sodium Butyrate --- Sodium Molybdate --- Sodium Perborate --- Sodium Hydroxide --- Sodium Sulphate --- Sodium Thiosulfate --- Urea --- Zinc Chloride --- Zinc Sulphate ---
Other Best Selling Products
Ammonium Persulfate --- Ceric Ammonium Nitrate --- Encapsulated Fumaric Acid --- Picric Acid --- Sodium Diacetate

Carmellose Sodium
IP BP Ph Eur Grades
Carmellose Sodium