FDA Approved, ISO-9001, ISO-14001, ISO OHSAS-18001, HACCP, FSSC 220000, FSSAI, "REACH" Pre-registered Kosher & Halal cGMP Certified
Search for the supplies that you need here:
Calcium Polystyrene Sulfonate BP Grade Manufacturers
Anmol Chemicals Group, established in 1976, is the pioneer manufacturer of Specialty chemicals, Pharmaceutical Excipients, Fragrance & Flavor chemicals in India. Anmol Chemicals Group has manufacturing facilities spread across Western India, representatives in Houston Chicago USA and toll manufacturers in China. We also have toll manufacturing units for processing chemicals in a few countries around the world. We make IP, BP, USP, Ph. Eur., FCC or Food Grade, ACS, AR or Analytical Reagent Grade, LR or Laboratory Reagent Grade, Pure and Technical Grades of various chemicals. All our items are analyzed to meet the required standards.
Our manufacturing facility is FDA approved and cGMP, ISO-9001, ISO-14001, ISO OHSAS 18000, ISO 22000-2005 HACCP, FSSAI, FSSC-22000, certified. Apart from good manufacturing practice, we also follow good laboratory practice. We are offering products manufactured as per Kosher and Halal approved certified method. We are pre-registered with "Reach" for export to European countries. We can give all solid chemical materials as per specified size or shape.
Calcium Polystyrene Sulfonate SDS of Manufacturers
Synonyms: Calcium Polystyrene Sulphonate
CAS Number: 37286-92-3, Molecular Weight: 223.3, Chemical Formula: C8H7CaO3S+, EINECS EC Number: ----, FEMA: ----,
Typical Specifications of Calcium Polystyrene Sulfonate:
Characteristic: A cream to light brown fine powder, free from foreign particles.
Solubility: Practically insoluble in water and in 96% ethanol.
1) The IR spectrum of the sample should be concordant with reference spectrum of Calcium Polystyrene Sulphonate BP grade.
2) Gives characteristic of Calcium Salt.
Fineness: Not more than 1% is retained on 100 mesh BSS 150 micron sieve.
Heavy Metals: Not more than 10ppm
Potassium Exchange Capacity: Each gram exchange not less than 1.3mEq and not more than 2 mEq calculated on dried basis.
Loss on Drying: <8%
Calcium Polystyrene Sulphonate BP
Action and use: Used in the treatment of hyperkalaemia.
Calcium Polystyrene Sulphonate is a cation-exchange resin prepared in the calcium form containing not less than 6.5% w/w and not more than 9.5% w/w of calcium, calculated with reference to the dried substance. Each g exchanges not less than 1.3 mEq and not more than 2.0 mEq of potassium, calculated with reference to the dried substance.
A cream to light brown, fine powder.
Practically insoluble in water and in ethanol (96%).
A. The infrared absorption spectrum, Appendix II A, is concordant with the reference spectrum of calcium polystyrene sulphonate.
B. Yields reaction C characteristic of calcium salts.
Particle size: Not more than 1% w/w is retained on a 150-μm sieve. Use 20 g and sieve for 5 minutes.
Potassium: Not more than 0.1% of K when determined by atomic emission spectrophotometry.
Sodium: Not more than 0.1% of Na when determined by atomic emission spectrophotometry ,
Heavy metals: Heat 4 g until charred, cool, add 4 ml of lead-free nitric acid and 0.5 ml of sulphuric acid drop wise and heat cautiously until white fumes are no longer evolved. Ignite in a muffle furnace at 500C to 600C until a white residue is obtained. Cool, add 4 ml of hydrochloric acid and dilute to 20 ml. The resulting solution complies with limit test A for heavy metals, Appendix VII. Use 2 ml of lead standard solution (10 ppm Pb) to prepare the standard (10 ppm).
Styrene: Carry out the method for liquid chromatography, Appendix III D, using the following solutions. For solution (1) shake 10 g of the substance being examined with 10 ml of acetone for 30 minutes, centrifuge and use the supernatant liquid. Solution (2) contains 0.0001% w/v of styrene in acetone.
The chromatographic procedure may be carried out using (a) a stainless steel column (30 cm × 4 mm) packed with octadecylsilyl silica gel for chromatography (μBondapak C18 is suitable), (b) a mixture of equal volumes of acetonitrile and water as the mobile phase with a flow rate of 2 ml per minute and (c) a detection wavelength of 254 nm. Inject separately 20 μl of each solution. The area of the peak corresponding to styrene in the chromatogram obtained with solution (1) is not greater than the area of the principal peak in the chromatogram obtained with solution (2) (1 ppm).
Potassium exchange capacity: To 3 g of the substance being examined in a dry 250 ml glass-stoppered flask add 100 ml of a solution containing 0.7455% w/v of potassium chloride and 0.4401% w/v of potassium hydrogen carbonate in water (solution A), stopper and shake for 15 minutes. Filter and dilute 2 ml of the filtrate to 1000 ml with water. Determine the concentration of unbound potassium in this solution by atomic emission spectrophotometry , Appendix II D, measuring at 766.5 nm and using solution A suitably diluted with water, to prepare the standard solutions. Calculate the potassium exchange capacity of the substance being examined in milliequivalents taking the concentration of potassium in solution A as 144 milliequivalents of K per litre.
Loss on drying: When dried at 70C at a pressure not exceeding 0.7 kPa for 16 hours, loses not more than 8.0% of its weight. Use 2 g.
Microbial contamination: Carry out a quantitative evaluation for Enterobacteria and certain other Gram-negative bacteria, Appendix XVI B1. 0.01 g of the substance being examined gives a negative result, Table I (most probable number of bacteria per gram fewer than 100).
Taloja Mumbai and Ankleshwar Gujarat, INDIA
Representatives in Houston, Chicago and New York, USA
TEL: (OFF) 91-22-23726950, 23774610, 23723564
Copyright and Usual Disclaimer is Applicable
Last updated 14-jan-19
Exporters to USA, Canada, UAE, Europe, South Africa, Tanzania, Kenya, Egypt, Turkey, Nigeria, Uganda, Brazil, Chile, Argentina, Dubai, Cameroon, Mexico, Brazil, Chile, Argentina, Korea, Thailand, Malaysia, Indonesia, Australia, China, Germany, France, etc.
Representatives in New York, Houston - Texas, Chicago - Illinois, Los Angeles.
Fast Selling IP BP USP ACS FCC Food Grades of Chemicals by Anmol Chemicals
Acetic Acid Glacial --- Aluminum Chloride --- Ammonium bicarbonate --- Ammonium Carbonate --- Ammonium Chloride --- Benzoic Acid --- Benzyl Alcohol --- Boric Acid --- Borax; Sodium Borate --- Calcium Butyrate --- Calcium Carbonate --- Calcium Chloride --- Calcium Hydroxide --- Calcium Saccharate --- Carbamide Peroxide --- Calcium Oxide --- Calcium Sulfate --- Chromic Chloride --- Copper Sulfate --- Cupric Chloride --- Ferric Chloride --- Fumaric Acid --- Magnesium Butyrate --- Magnesium Chloride --- Magnesium Sulfate --- Malic Acid --- Maleic Acid --- Manganese Chloride --- Manganese Sulfate --- Octyldodecanol --- Oleic acid --- Phenylethyl Alcohol --- Propylene Carbonate --- Potassium Bromide --- Potassium Bicarbonate --- Potassium Carbonate --- Potassium Chloride --- Potassium Hydroxide Pellets --- Potassium Acetate --- Potassium Alum --- Potassium Iodate --- Potassium Iodide --- Selenious Acid --- Sodium Acetate --- Sodium Butyrate --- Sodium Bicarbonate --- Sodium Chloride --- Sodium Molybdate --- Sodium Selenite --- Sodium Perborate --- Sodium Hydroxide --- Sodium Sulphate --- Sodium Sulfide --- Sodium Thiosulfate --- Urea --- Zinc Chloride --- Zinc Sulphate ---
Other Best Selling Products
Ammonium Persulfate --- Butylated Hydroxyanisole --- Butylated Hydroxytoluene --- Encapsulated Fumaric Acid --- Sodium Bromate --- Sodium Diacetate --- TBHQ
Calcium Polystyrene Sulfonate
BP Ph Eur Grades Manufacturers