(FDA) GMP Approved, ISO-9001:2008, ISO-14001, ISO OHSAS-18001, HACCP, FSSC 220000, FSSAI, "REACH" Pre-registered Kosher & Halal Certified
Aluminium Glycinate BP IP Grade Manufacturers
Anmol Chemicals Group, established in 1976, is the pioneer manufacturer of Specialty chemicals, Pharmaceutical Excipients, Fragrance & Flavor chemicals in India. Anmol Chemicals Group has manufacturing facilities spread across Western India, representatives in Houston Chicago USA and toll manufacturers in China. We also have toll manufacturing units for processing chemicals in a few countries around the world. We make IP, BP, USP, Ph. Eur., FCC or Food Grade, ACS, AR or Analytical Reagent Grade, LR or Laboratory Reagent Grade, Pure and Technical Grades of various chemicals. All our items are analyzed to meet the required standards.
Our manufacturing facility is FDA approved and GMP, ISO-9001-2008, ISO-14001, ISO OHSAS 18000, ISO 22000-2005 HACCP, FSSAI, FSSC-22000, certified. We are offering products manufactured as per Kosher and Halal approved certified method. We are pre-registered with "Reach" for export to European countries. We can give all solid chemical materials as per specified size or shape.
Aluminium Glycinate SDS of Manufacturers
Synonyms: Glycine, aluminum salt
CAS Number: 13682-92-3 (or 41354-48-7), Molecular Weight: 135.05, Chemical Formula: C2H6AlNO4, EINECS EC Number: 237-193-8, FEMA: ----,
Aluminium Glycinate BP Grade
C2H6AlNO4,xH2O --- 135.1 --- 41354-48-7
Action and use: Antacid.
Aluminium Glycinate is a basic aluminium monoglycinate, partly hydrated. It contains not less than 34.5% and not more than 38.5% of Al2O3 and not less than 9.9% and not more than 10.8% of N, both calculated with reference to the dried substance.
A white or almost white powder.
Practically insoluble in water and in organic solvents. It dissolves in dilute mineral acids and in aqueous solutions of the alkali hydroxides.
A. Add 0.1 g to 10 ml of a solution prepared by dissolving 0.84 g of citric acid in 8 ml of 1M sodium hydroxide and diluting to 20 ml with water. Add 0.5 ml of a 0.1% w/v solution of ninhydrin in methanol and warm. A purple colour is produced.
B. Suspend 1 g in 25 ml of 0.5M hydrochloric acid and heat gently until a clear solution is produced. Reserve half of the solution. To 2 ml of the solution add 0.15 ml of liquefied phenol , shake and add carefully without shaking 5 ml of dilute sodium hypochlorite solution. A blue colour is produced.
C. The solution reserved in test B yields the reaction characteristic of aluminium salts.
Acidity or alkalinity: pH of a suspension of 1 g in 25 ml of carbon dioxide-free water, 6.5 to 7.5.
Neutralising capacity: Shake 0.2 g vigorously with 25 ml of 0.1M hydrochloric acid for 5 minutes and allow to stand for 5 minutes. The pH of the mixture is greater than 3.0.
Arsenic: Dissolve 2.0 g in 18 ml of brominated hydrochloric acid and 32 ml of water. 25 ml of the resulting solution complies with the limit test for arsenic, 1 ppm.
Heavy metals: Dissolve 1.5 g in 20 ml of 2M hydrochloric acid and 10 ml of water, add 0.5 ml of nitric acid and boil for about 30 seconds. Cool, add 2 g of ammonium chloride and 2 g of ammonium thiocyanate and extract with two 10 ml quantities of a mixture of equal parts of isoamyl alcohol and ether . To the aqueous layer add 2 g of citric acid. 12 ml of the resulting solution complies with limit test A for heavy metals, Appendix VII. Use lead standard solution (1 ppm Pb) to prepare the standard (20 ppm).
Mercuric salts: To pass the test.
Chloride: Dissolve 1.0 g in 10 ml of 2M nitric acid and dilute to 100 ml with water. 15 ml of the resulting solution complies with the limit test for chlorides, Appendix VII (330 ppm).
Loss on drying: When dried to constant weight at 130C, loses not more than 12.0% of its weight. Use 1 g.
For Al2O3: Dissolve 0.25 g in a mixture of 3 ml of 1M hydrochloric acid and 50 ml of water, add 50 ml of 0.05M disodium edetate and neutralise with 1M sodium hydroxide using methyl red solution as indicator. Heat the solution to boiling, allow to stand for 10 minutes on a water bath, cool rapidly, add about 50 mg of xylenol orange triturate and 5 g of hexamine and titrate the excess of disodium edetate with 0.05M lead nitrate until the solution becomes red.
Each ml of 0.05M disodium edetate VS is equivalent to 2.549 mg of Al2O3.
Taloja Mumbai and Ankleshwar Gujarat, INDIA
Representatives in Houston, Chicago and New York, USA
TEL: (OFF) 91-22-23726950, 23774610, 23723564
Copyright and Usual Disclaimer is Applicable
Last updated 5-aug-17
Exporters to USA, Canada, UAE, Europe, South Africa, Tanzania, Kenya, Egypt, Turkey, Nigeria, Uganda, Brazil, Chile, Argentina, Dubai, Cameroon, Mexico, Brazil, Chile, Argentina, Korea, Thailand, Malaysia, Indonesia, Australia, China, Germany, France, etc.
Representatives in New York, Houston - Texas, Chicago - Illinois, Los Angeles.
Fast Selling IP BP USP ACS FCC Food Grades of Chemicals by Anmol Chemicals
Aluminum Chloride --- Ammonium Chloride --- Ammonium Molybdate --- Benzyl Alcohol --- Bismuth Citrate --- Boric Acid --- Borax; Sodium Borate --- Calcium Butyrate --- Calcium Carbonate --- Calcium Chloride --- Calcium Hydroxide --- Calcium Saccharate --- Carbamide Peroxide --- Carmellose Calcium --- Carmellose Sodium --- Calcium Oxide --- Calcium Sulfate --- Chromic Chloride --- Copper Sulfate --- Cupric Chloride --- Ferric Chloride --- Fumaric Acid ---Magnesium Butyrate --- Magnesium Chloride --- Magnesium Sulfate --- Magnesium Oxide --- Malic Acid --- Maleic Acid --- Manganese Chloride --- Manganese Sulfate --- Propylene Carbonate --- Potassium Bromide --- Potassium Chloride --- Potassium Hydroxide Pellets --- Potassium Alum --- Sodium Acetate --- Sodium Butyrate --- Sodium Molybdate --- Sodium Perborate --- Sodium Hydroxide --- Sodium Sulphate --- Sodium Thiosulfate --- Urea --- Zinc Chloride --- Zinc Sulphate ---
Other Best Selling Products
Ammonium Persulfate --- Ceric Ammonium Nitrate --- Encapsulated Fumaric Acid --- Picric Acid --- Sodium Diacetate
IP BP Ph Eur Grades