Anmol India Chemicals India

ISO-9001 JK Kosher GMP HACCP FSSAI FSSC 22000 FSSAI ISO14001 OHSAS 18001 Allergen free Gluten free
FDA Approved, ISO-9001, ISO-14001, ISO OHSAS-18001, HACCP, FSSC 220000, FSSAI, "REACH" Pre-registered Kosher & Halal cGMP Certified

Search for the supplies that you need here:

Home ------ Contact

Adipic Acid SDS MSDS Sheet of Manufacturers

Anmol Chemicals Group, established in 1976, is the pioneer manufacturer of Specialty chemicals, Pharmaceutical Excipients, Fragrance & Flavor chemicals in India. Anmol Chemicals Group has manufacturing facilities spread across Western India, representatives in Houston Chicago USA and toll manufacturers in China. We also have toll manufacturing units for processing chemicals in a few countries around the world. We make IP, BP, USP, Ph. Eur., FCC or Food Grade, ACS, AR or Analytical Reagent Grade, LR or Laboratory Reagent Grade, Pure and Technical Grades of various chemicals. All our items are analyzed to meet the required standards.

Our manufacturing facility is FDA approved and cGMP, ISO-9001, ISO-14001, ISO OHSAS 18000, ISO 22000-2005 HACCP, FSSAI, FSSC-22000, certified. Apart from good manufacturing practice, we also follow good laboratory practice. We are offering products manufactured as per Kosher and Halal approved certified method. We are pre-registered with "Reach" for export to European countries. We can give all solid chemical materials as per specified size or shape.

Exporter Importer by Sea Exports by Air Chemical Exporter. Palletized for Export. Liquid Products HDPE Drum Packing of Chemicals Bulk Export Packing Jumbo Bag Packing

Adipic Acid Specifications of Manufacturers

Adipic Acid Manufacturers

Adipic Acid SDS MSDS, Material Safety Data Sheet

SECTION 1. PRODUCT IDENTIFICATION

Product Identity: Adipic Acid or Hexanedioic acid.
CAS Number: 124-04-9
EINECS EC Number: 204-673-3
Molecular Formula: C6H10O4
Molecular Weight: 146.14
Recommended usage: Industrial Manufacturing.

SECTION 2. HAZARDS IDENTIFICATION

GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008

Serious eye damage (Category 1)

Labeling according GHS USA & Regulation (EC) No 1272/2008

GHS Label Elements
Corrosive
Corrosive

Signal Words: Danger

Hazard statements:
H318: Causes serious eye damage.

Precautionary statements:
P261: Avoid breathing dust/ fume/ gas/ mist/ vapors/ spray.
P262: Do not get in eyes, on skin, or on clothing.
P264 Wash skin thoroughly after handling.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.

Classification according to European Directive 67/548/EEC as amended:
Hazard symbol(s)
Xn Harmful
R-phrase(s):
R41 Risk of serious damage to eyes.

SECTION 3. COMPOSITION / INFORMATION ON INGREDIENTS

Product Identity: Adipic Acid or Hexanedioic acid.
CAS Number: 124-04-9
EINECS EC Number: 204-673-3

SECTION 4. FIRST AID MEASURES

Always seek medical attention after first aid measures are provided.

Eye Contact: Do not allow victim to rub eye (s). Let the eye (s) water naturally for a few minutes. If particle/dust does not dislodge, flush with lukewarm, gently flowing water for 5 minutes or until particle/dust is removed, while holding eyelid (s) open. If irritation persists, obtain medical attention. DO NOT attempt to manually remove anything stuck to the eye.
Skin Contact: Remove contaminated clothing, shoes and leather goods (e.g. watchbands, belts). Quickly and gently blot or brush away excess chemical. Wash gently and thoroughly with lukewarm gently flowing water and non-abrasive soap for 5 minutes. If irritation persists, repeat flushing. Obtain medical advice. Completely decontaminate clothing, shoes and leather goods before reuse or else discard.
Inhalation: If symptoms are experienced, remove source of contamination or move victim to fresh air. Obtain medical advice.
Ingestion: Never give anything by mouth if victim is rapidly losing consciousness, or is unconscious or convulsing. Have victim rinse mouth thoroughly with water. DO NOT INDUCE VOMITING.

SECTION 5. FIRE FIGHTING MEASURES

Fire and Explosion Hazards: Not considered flammable but may burn at high temperatures. Airborne dusts of this product in an enclosed space and in the presence of an ignition source may constitute an explosion hazard.
Extinguishing Media: Use means of extinction appropriate for the surrounding fire conditions such as water spray, carbon dioxide, dry chemical, or foam.
Fire Fighting: Apart from oxides of carbon. toxic fumes may result from combustion. As with any fire, fire fighters should be fully trained and wear full protective clothing including an approved, self-contained breathing apparatus which supplies a positive air pressure within a full face piece mask. Use water spray to cool unopened containers.

SECTION 6. ACCIDENTAL RELEASE MEASURES

Procedures for Cleanup: Stop release if possible to do so safely. Contain spill, isolate hazard area, and deny entry. Sweep up or vacuum. Place contaminated material in suitable, labeled containers for final disposal. Dispose of waste material consistent with the requirements of waste disposal authorities.
Personal Precautions: Gloves and coveralls or other protective clothing are recommended for persons responding to an accidental release. Close-fitting safety goggles may be necessary in some circumstances to prevent eye contact.
Environmental Precautions: This Contamination of soil and water should be prevented. Keep spillage from entering soil, streams or sewers.

SECTION 7. HANDLING AND STORAGE

Store in cool, dry, well-ventilated area away from incompatible substances. Protect from physical damage. Keep away from sources of ignition. Take measures to prevent the build-up of electrostatic charge. It is good practice to keep  container closed when not in use. Avoid generating dust and the release of dust into the workplace. May form combustible dust concentrations in air. Use care during processing to minimize generation of dust. Good housekeeping is important to prevent accumulations of dust. Do not store together with: Oxidizing agents Keep away from reducing agents.

SECTION 8. EXPOSURE CONTROLS / PERSONAL PROTECTION

Protective Clothing: The hazard potential is low. Where there is large scale use of this material and significant potential for worker contact, gloves and long sleeved work clothes or disposable coveralls may be necessary. Eye protection should be worn where dust is generated and there is a potential that eye contact may occur. Ensure that eyewash stations and safety showers are close to the workstation location. Do not breathe dust.
Ventilation: Use adequate local or general ventilation where necessary to maintain the concentrations of dust well below the recommended occupational exposure limits for general Particulates, Not Otherwise Specified (PNOS).
Respirators: Where dust or fumes are generated and cannot be controlled to within acceptable levels by engineering means, use appropriate NIOSH-approved respiratory protection equipment (a 42CFR84 Class N, R or P-95 particulate filter cartridge).
Exposure limit(s): Contains no substances with occupational exposure limit values in some countries. Better go by 5 mg/m3 TLV ACGIH.

SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES

Appearance: It is a white, odorless granules crystals or powder
Odor: None
Physical State: Solid
pH: 2.5 to 4
Vapor Pressure: Negligible @ 20C
Freezing/Melting Point/Range: 151 °C to 154 °C
Boiling Point: Decomposes at 337C
Specific Gravity: 1.36
Solubility in Water: Soluble in water.
Molecular Formula: C6H10O4
Molecular Weight: 146.14

SECTION 10. STABILITY AND REACTIVITY

Stability and Reactivity: Stable and not considered reactive under normal temperatures and pressures. Hazardous polymerization or runaway reactions will not occur.
Incompatibilities: Oxidizing agents. Avoid excessive heat, spark, flame, ignition dust formation and electrical charging. Also avoid strong reducing agents and bases.
Hazardous Decomposition Products: High temperature operations will generate carbon oxide and fumes.

SECTION 11. TOXICOLOGICAL INFORMATION

Acute Toxicity:
LD50 Oral - Rat - male and female - 5,560 mg/kg
LC0 Inhalation - Rat - male and female - 4 h - > 7.7 mg/l
LD0 Dermal - Rabbit - male and female - 7,940 mg/kg
Carcinogenicity: IARC: No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity: Not Available.
Teratogenicity: Not Available
Mutagenicity: Not Available
To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly investigated.

SECTION 12. ECOLOGICAL INFORMATION

Eco toxicological data:
Toxicity to fish: static test LC0 - Brachydanio rerio (zebrafish) - >= 1,000 mg/l - 96 h
Toxicity to daphnia and other aquatic invertebrates: Immobilization LC50 - Daphnia magna (Water flea) - 46 mg/l - 48 h
Results of PBT and vPvB assessment: This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.
Mobility in soil: No information available.

SECTION 13. DISPOSAL CONSIDERATIONS

Do not wash the material down drain. Put uncontaminated material back into the process if at all possible. Place contaminated material in suitable, labeled containers for disposal. Dispose of waste material consistent with the requirements of waste disposal authorities.

SECTION 14. TRANSPORT INFORMATION

Classification: Not a DOT controlled material (United States).
DOT ADR/RID: Not regulated for transport.
IATA: Not regulated for transport.
IMDG: Not regulated for transport.

SECTION 15. REGULATORY INFORMATION

USA Regulations:
SARA 311/312 Hazards: Acute Health Hazard
SARA 313 Components: This material does not contain any chemical components with known CAS numbers that exceed the threshold (De Minimis) reporting levels established by SARA Title III, Section 313.
SARA 302 Components: No chemicals in this material are subject to the reporting requirements of SARA Title III, Section 302.
California Prop. 65 Components: This product does not contain any chemicals known to State of California to cause cancer, birth defects, or any other reproductive harm.

SECTION 16 - ADDITIONAL INFORMATION

Disclaimer:
**************************
Our company provides this MSDS sheet in good faith but makes no representation as to its comprehensiveness or accuracy. This SDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. The above information has been compiled from various sources and has the possibility of discrepancy and being out-dated information. Individuals receiving the information must exercise their independent judgment and do further search in determining its appropriateness for a particular purpose. In no case shall our company be liable to loss or damages by the product user.
**************************

Logo

Manufacturers

ANMOL CHEMICALS
Taloja Mumbai and Ankleshwar Gujarat, INDIA
Representatives in Houston, Chicago and New York, USA
TEL: (OFF) 91-22-23726950, 23774610, 23723564

e-mail: info@anmol.org

Copyright and Usual Disclaimer is Applicable
Last updated 12-jan-19

Calcium Chloride in Jumbo Bags Drum Packing Paletized and Shrink Wrapped Packing for Exports to USA UAE Africa Tanzania Turkey Kenya Dubai

Exporters to USA, Canada, UAE, Europe, South Africa, Tanzania, Kenya, Egypt, Turkey, Nigeria, Uganda, Brazil, Chile, Argentina, Dubai, Cameroon, Mexico, Brazil, Chile, Argentina, Korea, Thailand, Malaysia, Indonesia, Australia, China, Germany, France, etc.

Representatives in New York, Houston - Texas, Chicago - Illinois, Los Angeles.

Fast Selling IP BP USP ACS FCC Food Grades of Chemicals by Anmol Chemicals
Acetic Acid Glacial --- Aluminum Chloride --- Ammonium bicarbonate --- Ammonium Carbonate --- Ammonium Chloride --- Benzoic Acid --- Benzyl Alcohol --- Boric Acid --- Borax; Sodium Borate --- Calcium Butyrate --- Calcium Carbonate --- Calcium Chloride --- Calcium Hydroxide --- Calcium Saccharate --- Carbamide Peroxide --- Calcium Oxide --- Calcium Sulfate --- Chromic Chloride --- Copper Sulfate --- Cupric Chloride --- Ferric Chloride --- Fumaric Acid --- Magnesium Butyrate --- Magnesium Chloride --- Magnesium Sulfate --- Malic Acid --- Maleic Acid --- Manganese Chloride --- Manganese Sulfate --- Octyldodecanol --- Oleic acid --- Phenylethyl Alcohol --- Propylene Carbonate --- Potassium Bromide --- Potassium Bicarbonate --- Potassium Carbonate --- Potassium Chloride --- Potassium Hydroxide Pellets --- Potassium Acetate --- Potassium Alum --- Potassium Iodate --- Potassium Iodide --- Selenious Acid --- Sodium Acetate --- Sodium Butyrate --- Sodium Bicarbonate --- Sodium Chloride --- Sodium Molybdate --- Sodium Selenite --- Sodium Perborate --- Sodium Hydroxide --- Sodium Sulphate --- Sodium Sulfide --- Sodium Thiosulfate --- Urea --- Zinc Chloride --- Zinc Sulphate ---
Other Best Selling Products
Ammonium Persulfate --- Butylated Hydroxyanisole --- Butylated Hydroxytoluene --- Encapsulated Fumaric Acid --- Sodium Bromate --- Sodium Diacetate --- TBHQ